laser equipment: laser powermeter, CNI laser 200mw, DT40 pro, mirrors, mounts etc..

[cruch]

due to some personal problems in my life, I need to sell off some laserstuff.

Jians DT 40 Pro galvos 435usd shipped w/trackingand insurance. Will not send off without insuranse. (10usd goes to PL janitor) sold to taggalucci
Green 200mw CNI laser (2 hours if use): 435usd shipped with insuranse and tracking. Will not send off without insuranse.(10usd goes to PL janitor)

Solenoids w/mounts: used for saftey beam shutter 70 usd shipped w/o tracking, add 20usd for tracking (5usd goes to PL janitor)

Breakout board: 20usd shipped w/o tracking (5usd goes to PL janitor)

Alumimum Extrusions, black :25,5 cm x 16,5 cm
Great for small laser builds...Complete. Give me an offer (10usd goes to PL janitor)


Some dichroic 15mm from lasewave (new, not used):
and 2 is used
reflect blue and pass green and red - 20usd shipped w/o tracking (2usd goes to PL janitor)
reflect red, pass green and blue - 20usd shipped w/o tracking (2usd goes to PL janitor)
NEW reflect blue, pass green and red - 30usd shipped w/o tracking (3usd goes to PL janitor) Sold to taggalucci
NEW reflect red, pass blue and green -30usd shipped w/o tracking (3usd goes to PL janitor) Sold to taggalucci
NEW reflect blue and green, pass red - 30usd shipped w/o tracking (3usd goes to PL janitor)

Small size mirrors/mount 4 pcs with mirrors, reflect all colors:

More mirrors/mounts with mirrors, reflect all colors. :

2 mounts (3axis/reflect red) and one 2axis

2 pcs red lasers 200mw TTL 65usd each incl shipping (5usd goes to PL janitor)



regards

[andy_con]

interested in the small fb3 housing.

can i get some pics of inside please.

looks like its made for the small usb plug of the original fb3 not the new bigger usb plug?

[cruch]

It is for the small usb connector.
here you go andy:

[andy_con]

how much do you want for it

[cruch]

dont know? 50usd incl shipping?

[andy_con]

umm really, umm ill give you $30 for it?

[polishedball]

Whos dichros? laserwave?

[cruch]

yes, laserwave!

andy, if you say 40usd, i can do that

[andy_con]

na ill pass thanks leave it for someone else

[djmatt]

Ill take one of the DZ break out boards Please!
Do you take PayPal?
DJ Matt