Aixiz 405 lens test with 445

[andy_con]

i just got some aixiz 405 glass lens.

http://cgi.ebay.co.uk/ws/eBayISAPI.d...=STRK:MEWNX:IT

i am currently running my 445 with a standard aixiz plastic lens im getting 520mw -



next i put the 405 lens in and again 520mw -



so to top this thread off, although theres no power increase with the 405 glass lens the beam is slightly better.

[ElektroFreak]

It's weird that you get no increase, although the coatings on the Aixiz glass 405 lenses do seem to be a little inconsistent. I get 15% more power from the older 405nm Aixiz half-threaded lenses vs. acrylic, and I get the same increase using o-like's half-threaded 405nm lenses. I have one of the new full-threaded 405nm lenses from Aixiz, but I used it for a few seconds, saw that the beam was crap and stopped using it. I've since purchased all my 405nm glass lens assemblies from o-like.com.

What distance from the source are your measurements taken?

[andy_con]

It's weird that you get no increase, although the coatings on the Aixiz glass 405 lenses do seem to be a little inconsistent. I get 15% more power from the older 405nm Aixiz half-threaded lenses vs. acrylic, and I get the same increase using o-like's half-threaded 405nm lenses. I have one of the new full-threaded 405nm lenses from Aixiz, but I used it for a few seconds, saw that the beam was crap and stopped using it. I've since purchased all my 405nm glass lens assemblies from o-like.com.

What distance from the source are your measurements taken?

this is a full threaded 405 lens.

i am going to purchase an o-like now

[polishedball]

It's weird that you get no increase, although the coatings on the Aixiz glass 405 lenses do seem to be a little inconsistent. I get 15% more power from the older 405nm Aixiz half-threaded lenses vs. acrylic, and I get the same increase using o-like's half-threaded 405nm lenses. I have one of the new full-threaded 405nm lenses from Aixiz, but I used it for a few seconds, saw that the beam was crap and stopped using it. I've since purchased all my 405nm glass lens assemblies from o-like.com.

What distance from the source are your measurements taken?

Same experience with the new full threads.... comparison picture
photo (1).jpgphoto.jpg

[beamann]

tracking thread for my RGB build

[Lexat8]

tracking thread for my RGB build

Try Thread tools/ subscribe?

Lex

[andy_con]

all measurements are at 17m

aixiz plastic lens




aixiz glass lens




o-like lens

[kitatit]

Try Thread tools/ subscribe?

Lex

Hi Lex,

OHH! I'm so clueless I didn't know you could do that

I'm still a bit new at using forums.

Thanks, I have learnt something today

Kit