Results 1 to 3 of 3

Thread: I would like a breadboard for a lasershow setup

  1. #1
    Join Date
    May 2009
    Location
    Sacramento, California
    Posts
    608

    Default I would like a breadboard for a lasershow setup

    Im interested in a breadboard thats been neglected, abused, worn or dirty.
    Something in the 4 foot by two foot size.no smaller than three by two otherwise the system wont fit.
    It can be steel or aluminum.
    Looks and age are not important.
    I am building my very first full color gas rig and I need to mount my Spectra-Physics 107 He-Ne ,my ALC-60X,PCAOM,scanners and dual safety interlock system on it.
    Im a poor boy,looking for the most inexpensive breadboard this first time out.
    again, it can have rust all over it, be covered in mud, be in the way of the beer fridge in the garage, have tire tracks on it, I dont care. Steel wool,windex,elbow grease and a power washer can do wonders!

    (I feel like I should have a cardboard sign around my neck *will work for spare optical board* )

    Thanks guys and gals for reading and giving it a moments thought.
    Drop me a note.
    ~Nate.
    Will there be three phase!!!!

  2. #2
    Join Date
    Jun 2005
    Location
    Los Angeles
    Posts
    263

    Default

    I might have an aluminum extrusion laying around that might suit your needs. I'm in the Los Angeles area. Let me take a look in the morning. I think I also have an enclosure for it.

    Ivan

  3. #3
    Join Date
    May 2009
    Location
    Sacramento, California
    Posts
    608

    Default

    Hey , thank you very much. =) .
    Go ahead and pm me with details.
    Thanks.
    Nate
    Will there be three phase!!!!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •