-
Necrobump and double-posting=bad bad bad. I know, and apologise in advance.
I've finally got some pics of this laser running analog mod. Needless to say, not pretty. All photos were taken with the laser running through a tunnelgun.
It seems that from 5V down to 2.9V, there's no visible change in output, both to the eye, and to the camera.
From 2.9V onwards, the output becomes pulsed, and can be visibly seen breaking up into small 'dots'.
This photo was taken at 2.9V
This one at 1.5V
And these two at 0.8V
From these pictures it can be seen that there are two pulse 'sequences'- a faster one (which causes the output to break up), and a significantly slower one that although is not visible to the human eye, is captured by the camera and causes a large chunk of the output to disappear in one of the photos.
-
Triangle Lights DPSS 532nm with Flexmod
Got this Triangle Lights 532nm DPSS working with a Flexmod, but still having some little problems. Check out the results here: http://www.photonlexicon.com/forums/...TL-to-Analog)/
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules