got 2 of these modules for a prodject ive abandond due to time they both have only been fired for a test (less than 1 hr) one modules modulation wires wer cut short but that is an easy fix. these are analog modulation . Here is the Specs that wer provided to me
Open to Offers or trade! Pay pal accepted.
Product's Technical Parameter:
● Model No.: LA—D—650-1000 ● Wavelength: 650±5nm ● Output Power: 1000mw ● Beam Mode: Near TEM00(means the beam is not fully dot) ● Operation Mode: CW ● Cooling Mode: TEC+Fan
● Power Stability: ±3%rms,4hour ● Warm-up Time: 5min ● M2 Factor <20 ● Beam Divergence,Full angle: <3 mrad ● Beam Height At Aperature(1/e2 Representative Value): ~6.0mm ● Beam Height From Base Plate: 55mm ● Spectral Linewidth: <1.5nm ● Polarization Ratio: >50:1 ● Pointing Stability After Warm-up: <0.05mrad ●Operating Temperature: 10~35℃ ● Expected Lifetime: 10000 hours ● Net Weight: 1.5kg
● Dimension: 164.5mm*125mm*78mm
● Power Supply(80~260VA): LA-0.3A-1 ● TTL Modulation: Optional,1-10KHZ or higher. If request,Higher rate up to 40KHZ available ● Analog Modulation: Optional,1-10KHZ or higher..0 min when 0-5VDC signal input ● Warranty Time: 1 year