CS-400RGB - Cutting Out

[hobbybob]

Most part of times this could be true
Just for record.... Long times ago I bought PRO400RGY projector.
I measured its output power...
445mW (CNI) of red at 650nm and 115mW (CNI) of green at 532nm.
Total power: declared=400mW; measured 560mW!!!
I think this is only just a "lucky factor"....

When (long long long times ago...) I bought CS800RGY, found inside:
- 2 barrel red diode 2 x 120mW at 660nm (crap diodes...)
- n°1 green diode 105mW at 532nm
Total power: 120 + 120 +105 = only 345mW...... holy cow!!!

I already guess you obvious question.....Where the missing 445mW has gone?
Who knows?

Yup, but you wrote it yourself: the laserwave that did output above spec was using CNI modules. Then when they start messing with crap diodes and other unknown stuff crap comes out (or rather doesn't come out...)

[laserwinkel]

i had exactly the same problem with one of my CS-150G's that i transformed to a CS-1000B (445nm)

problem seemed to be in the scanners
when scanners where replaced everything worked ok.
weird thing was that it only had the problems while a ILDA cable was connected.
but not looked further it is warranty work :P