Ghosts in the Pangolin Software - the impossible happened

[norty303]

From what I read, all 4 lasers were on the same FB3, therefore couldn't do anything other than do the same as each other. You can assign zones to different FB3's but not specific projectors on the FB3

This is why I'm confused how any of the lasers managed to display the first frame for the duration, when the signal coming from the DAC was clearly the whole show (otherwise the projector that worked would never have shown the show)

[Lasermad]

Yip 4 lasers all connected to one FB3 , all ended up , doin different things ( well as listed above )

Im pretty sure this was caused by signals setting off DMX boards in two lasers , ( set off the internals show ) those DMX boards are now removed and everything seems fine

does this make sense

paul

[White-Light]

From what I read, all 4 lasers were on the same FB3, therefore couldn't do anything other than do the same as each other.

I missed that on the re-read last night. On the same FB3 you're right they couldn't do anything different.

[norty303]

those DMX boards are now removed

Good. Work of the devil!