Yes, but 2 mirrors = 2 alignment problems. For a RGB its a big problem.
nothing can go wrong with a waveplate.
Yes, but 2 mirrors = 2 alignment problems. For a RGB its a big problem.
nothing can go wrong with a waveplate.
Just mount it to a decent heatsink and build a set of "L" brakets to rotate one of the red heads on its side...
Love, peace, and grease,
allthat... aka: aaron@pangolin
coming back to the topic of watercooling, it costs double as much as a same size normal breadboard, but it sure is a nice "gadget"
http://www.thorlabs.de/thorProduct.c...mber=MBC3030/M
just worked a bit on the laser again.
Fitted the following to the base plate:
green module
red module
red module
Dichro
but now i at the part with the PBS
i cannot seem to get it good.
here are pictures of the 2 beams:
DSC03890.JPG DSC03889.JPG
polarization on first picture looks ok.
but on the 2nd module i am not sure what to do with that.
any advise please![]()
Just shoot it trough a PBS an see what happens.
if you can not find a solution just take those flashlights to the LEM an we will figure it out.
DSC03969.JPG DSC03967.JPG
little preview
working on placing the scanners now
I have to say, the cyan from the 532 and 445 together looks pretty sweet. Would even be a great colour in its own right.
Was the 650nm just switched off here or is it not working yet?
That reminds a bit of the gas colour although its very hard to tell from a pic.
Don't forget that by mixing 532 + 445 you are effectively shifting the perceived wavelength upwards, so moving away from 445. The only thing is the shift stays to the green side of things with a mix rather than pure blue although I'm not sure the eye can easily detect the difference.
Can't wait for 460nm diodes to become widely available and hopefully cheap as hopefully that will provide a bridge between 445 & 473 in much the way as 642 was to 635 and 650.
was switched off because i only have 2 power supply's for the analogue signal ^^
but anyways the beam of 2,5 mrad wouldn't look nice next to the other beams
i am looking for a better red for it but until i got a better red i will use this one
probally going to add a quad or 8x 642nm
new pics
current setup RGB 1:1:1 watt
DSC04038.JPG DSC04036.JPG DSC04037.JPG
now need to tune the scanners.