Page 1 of 16 1234511 ... LastLast
Results 1 to 10 of 156

Thread: Front surface mirrors are go

  1. #1
    Join Date
    Feb 2007
    Location
    Herts, UK
    Posts
    1,253

    Default Front surface mirrors are go

    Been working with my optics chap to get some good broadband front surface mirrors together and have some >99% reflective beam steering and galvo mirrors on order, these should be with me just before mid December and will be re-packaged and sent out again usually within 24 hours.

    Sizes and prices (including PP fees and P&P):
    Steering mirrors:
    10x10x2mm: £4.40 GBP each
    10x20x2mm: £5.20 GBP each
    Galvo mirrors:
    6x11x.7mm: £8.00 GBP per pair
    7x12x.7mm: £9.00 GBP per pair

    Performance:

    Average of Rs and Rp @ 45 degrees AOI:


    Some figures for wavelengths that may be of interest:
    405nm : 99.7489% reflective @ 45 degrees AOI
    445nm : 99.8713% reflective @ 45 degrees AOI
    532nm : 99.8529% reflective @ 45 degrees AOI
    642nm : 99.9131% reflective @ 45 degrees AOI
    660nm : 99.8157% reflective @ 45 degrees AOI

    Specifications:
    Dimensions: As above (+/-0.1mm)
    Glass: BK7
    Scratch/Dig: 40/20
    Surface Accuracy: 1/8 (λ)
    Mirror coating: Dielectric
    Reflectivity: >99% over
    420-700nm @ 45 degrees AOI
    Damage threshold: .03MW/cm2


    List of mirror freaks identified so far:
    Please let me know of any +/- qty's asap
    The 6x11 and 7x12 galvo mirror quantities are in pairs not singles

    If you can please PayPal me the amount shown it would be much appreciated, just drop me a PM if you don't have my PP address, thanks.



    Last edited by p1t8ull; 02-03-2011 at 06:17.

  2. #2
    Join Date
    Dec 2006
    Location
    Essex, UK
    Posts
    8,615

    Default

    no real need but you can never have enough of this stuff ill take 6 please
    Eat Sleep Lase Repeat


    Aluminium Optic Mounts

    http://www.laser-man.co.uk/opticmounts/

  3. #3
    Join Date
    Oct 2010
    Location
    Athens, Greece
    Posts
    1,931

    Default

    nice work simon!!!

    you can count me in for at least 7

  4. #4
    Join Date
    Apr 2005
    Location
    SOUTHAMPTON U.K.
    Posts
    1,357

    Default

    I could take 10 if it all comes to plan.

  5. #5
    Join Date
    Dec 2006
    Location
    Scotland
    Posts
    1,408

    Default

    Quote Originally Posted by andy_con View Post
    no real need but you can never have enough of this stuff ill take 6 please
    Urghh ?
    http://www.photonlexicon.com/forums/...rfaced-mirrors

    Simon , whats the lead time
    as long as its not months you can mark me down for 10

    paul
    In the beginning there was none. Then came the light - #1 UKLEM - 2007
    BUY UK LEGAL LASER POINTER :: NEW - Blue 460nm Laser Pointers

  6. #6
    Join Date
    Dec 2006
    Location
    Essex, UK
    Posts
    8,615

    Default

    Quote Originally Posted by Lasermad View Post
    Urghh ?
    http://www.photonlexicon.com/forums/...rfaced-mirrors

    Simon , whats the lead time
    as long as its not months you can mark me down for 10

    paul
    robs sorting me out in the short term so these are for long term
    Eat Sleep Lase Repeat


    Aluminium Optic Mounts

    http://www.laser-man.co.uk/opticmounts/

  7. #7
    Join Date
    Oct 2008
    Location
    France
    Posts
    547

    Default

    yes, count me in, for 10 pieces too

  8. #8
    Join Date
    Jun 2010
    Location
    Zweibrücken, Germany
    Posts
    606

    Default

    Depending on when, im in for 10-20.

    Frank

  9. #9
    Join Date
    Jul 2009
    Location
    Dallas, Tx
    Posts
    372

    Default

    I'm in for 5-10

  10. #10
    Join Date
    Aug 2010
    Location
    London or Spain depending on the weather
    Posts
    1,381

    Default

    Quote Originally Posted by p1t8ull View Post
    Been working with my optics guy to get some good broadband front surface mirrors together and have today nailed some specs and prices down.
    I need to get 500 sold to be able to do them for £4.20 GBP each plus a bit for PP fees and P&P on each order.
    This is just a feeler at this stage to see if we have enough interest to pull it together so please shout up and we'll see how we go.

    Specifications:
    Dimensions: 10x10x2mm (+/-0.1mm)
    Glass: BK7
    Scratch/Dig: 40/20
    Surface Accuracy: 1/8 (λ)
    Wavelength: 400-700nm

    Reflectivity: >99% over range

    Blimey, Simon that was fast ! Pity about the 2mm though !

    I know lots of people don't trust thin substrates for beam steering, but they work fine if one is careful with the glue.

    If you could ask about thinner ones, double length, and data @ other angles to see if they can double as scanner mirrors, I think many more people might jump in.

    Does anyone else have thoughts on this?

    I'll take ten at least, regardless, but would take more if they were thinner and longer.

    Cheers
    Last edited by catalanjo; 11-03-2010 at 07:10. Reason: commas

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •