Drop Rob (stanwax) a PM and ask him![]()
Some resources detailing several cleaning techniques:
http://www.newport.com/store/genCont...cs/141176/1033
http://www.cvimellesgriot.com/produc...ningOptics.pdf
ter about 30 minutes in about 10 degree C. The cleaning liquid had some strange effect on the mirrors that where getting cold. So they where almost frosty. Its not often you have a gig where there is this cold perhaps but something to think about anyway[/QUOTE]
Cold cleaning fluids cause water to condense from the air. Bad cleaning fluids contain trace materials that leave a white film. Usually I use uhp methanol or uhp acetone. Spectroscopic or electronics grade works and why did PL just lock into italics??
I wont use IPA on a ion laser optic, the UV in the discharge polymerizes it.
Hydrogen Peroxide, 3% is a last ditch effort to remove certain films before discarding the optic.
Acetone first, to remove the grease, then methanol. Going backwards does not work for me, and I avoid acetone used alone like the plague.
My two favorite things are wood drug store throat swabs without glue, and Drop and Drag using really high grade lens tissues. Q-tips type swabs with the cardboard shafts usually leave a film.
Hint, never ever use use a chemwipe , on a cavity mirror.
Camera cleaning stuff from the drugstore, or the lens tissues that are wet and sold wrapped in foil, usually has a detergent and a surfactant in it, which wrecks havoc by leaving films. If you leave a film a half wavelength thick, the reflection from a dielectric mirror goes to heck in a handbasket.
Optics cleaning solvents should be like a dry martini, no water at all. Having never bothered to pay for a expensive martini,
I'll leave those to Mr Bond.
OK, I'm a purist, but when your cleaning a 700-1500$ cavity optic, you want it right the first time.
The easy way to spot residue films is to look at the mirror at a wide, glancing angle from the side, tilting the mirror toward a white light like the sun or a incandescent bulb. Pocket flashlights are good for this.
Some of this is just my opinion, and I know not everybody can afford a gallon of UHP methanol or a 60$ bottle of first contact. I know, I'm dreading the day that my gallon of UHP runs out.
More linx: http://www.repairfaq.org/sam/laseratr.htm#atrcln
Steve
Last edited by mixedgas; 11-18-2010 at 15:27.
Anyone ever tried equal ammounts of distilled vinegar & distilled water mixed for cleaning?
Works great for windows, not sure its refined enough for optics
I did once use 78% Polish vodka in an emergency.![]()