-
Welding plastic / Safty?
I was trying to melt some plastic parts together the other day, dident work that greate... But Im doing more tests later.
Question:
If I got hold of a plastic that "absorb" most of the blue light, is it safe to use for eye protection then? Or is there something else that I have to think about?
Made a video with both tests in it:
-
A blue laser is a poor choice for welding acrylic, deep IR would be a better choice.
By adding the black marker you have introduced contamination to any weld, blue light also discolours acrylic and makes it brittle.
As far as eye protection goes; you only have one pair of eyes to last your lifetime - buy the correct certified eye protection!
Doc's website
The Health and Safety Act 1971
Recklessly interfering with Darwin’s natural selection process, thereby extending the life cycle of dim-witted ignorami; thus perpetuating and magnifying the danger to us all, by enabling them to breed and walk amongst us, our children and loved ones.
-
You will have your best luck with thermoplastics. Acrylic is a thermoplastic, but acts more like a thermoset, and does not "weld" easily without a filler rod. It has a high glass transition temperature, causing it to stay somewhat crystaline. This is why for the most part, acrylics are cast from a two part mix, and not often injection molded.
Steve
-
The RepRap guys use PLA or ABS which seems to work a lot better.
Those guys have a bit of a challenge inducing 'localized heating' in their extruder assemblies for the plastic to extrude properly. I see an opportunity here.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules