Results 1 to 5 of 5

Thread: Manual and connectors for DT-25 Scanners...

  1. #1
    Join Date
    Jul 2007
    Location
    Knoxville, TN & Huntsville, AL, USA
    Posts
    3,121

    Default Manual and connectors for DT-25 Scanners...

    Does anyone have an electronic copy of the manual for the DT-25 scanners they could share?

    It appears I have inadvertently "recycled" my paper copy, and my electronic file is corrupted.

    Also -

    Does anyone by chance know a part number for a connector that is compatible with the DT-25 amp power supply block?

    Thanks in advance!

    Randy
    Last edited by Stuka; 11-20-2010 at 16:43.
    RR

    Metrologic HeNe 3.3mw Modulated laser, 2 Radio Shack motors, and a broken mirror.
    1979.
    Sweet.....

  2. #2
    Join Date
    Jul 2006
    Location
    Connecticut, USA
    Posts
    2,478

    Default

    randy-

    i will email jian for you and see if he has an electronic manual for the DT25's.

    what do you need for cables? i have some extras here of almost all connections. let me know what you need.

    -Marc
    http://www.laserist.org/images/ildalogos/ILDA-logo_colored-beams_Corporate_150w.jpg

    ILDA- U.S. Laser Regulatory Committee

    Authorized Dealer for:

    • Pangolin Laser Software and Hardware
    • KVANT Laser Modules & Laser Systems
    • X-Laser USA
    • CNI Lasers
    • Cambridge Technology & Eye Magic Professional Scanning Systems

    FDA/CDRH Certified Professional LuminanceRGB Laser Light Show Systems


  3. #3
    Join Date
    Jul 2007
    Location
    Knoxville, TN & Huntsville, AL, USA
    Posts
    3,121

    Default

    Quote Originally Posted by gottaluvlasers View Post
    randy-

    i will email jian for you and see if he has an electronic manual for the DT25's.

    what do you need for cables? i have some extras here of almost all connections. let me know what you need.

    -Marc
    Hey Marc -
    Thanks in advance for the assist!

    The cable (evidently left somewhere between Huntsville and Knoxville) I misplaced is the harness to connect the power supply to the DT-25 amp board. It's a 10-pin version of the same connector used for each end of the harnesses for the actual galvos.

    I can probably order or pick one up at the electronics supplier during my next trip home.
    RR

    Metrologic HeNe 3.3mw Modulated laser, 2 Radio Shack motors, and a broken mirror.
    1979.
    Sweet.....

  4. #4
    Join Date
    Dec 2009
    Location
    London UK
    Posts
    224

    Default

    Attached


    15's
    Attached Files Attached Files

  5. #5
    Join Date
    Jul 2007
    Location
    Knoxville, TN & Huntsville, AL, USA
    Posts
    3,121

    Default

    Quote Originally Posted by jaycey View Post
    Attached


    15's
    Thanks Jaycey!!
    RR

    Metrologic HeNe 3.3mw Modulated laser, 2 Radio Shack motors, and a broken mirror.
    1979.
    Sweet.....

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •