Random - Rubber seal?

[andy_con]

the rubber seal that compaines use to seal laser etc...

where to buy?

[stanwax]

Best you can hope for Andy is prob window draught excluder or similar - its my guess that most of the pro kit will have purpose made seals

Rob

[andy_con]

thats to big for small modules

[LaNeK779]

some sort of gasket from a motorcycle oil filter cap??

or a piece of teflon cut and shapped by you?


or a ready made o-ring solution, this one has a minimum order of 50usd http://www.quickcutgasket.com/ i'm sure you can find something similar near you

[dnar]

Hi Andy,

What you need is an o-ring supplier. You can buy this material my the meter/foot and they also sell the special glue to join the ends. Some even customer make to size in reasonably small quantities.

I have used this material myself in work projects, for IP67 sealed military enclosures.

[mixedgas]

McMaster Carr

www.mcmaster.com

http://www.mcmaster.com/#o-rings/=9ueolv

It has been my experience that every major city and most minor ones in the Western world have a place that sells orings, belts, bearings, gears,seals,shafts, and hydraulic hoses within a half hour's drive of the city. Most do not advertise themselves, because they almost always have a continuous stream of business. Our local one has a sign on the door: "If we're not here, just slip the money under the door"

Usually if you ask the mechanics, machinists, technicians, and heating/air conditioning people in town, they will know right where to send you. Because of the huge need, the parts are often pretty cheap, but well made.


Steve

[andy_con]

something liek this

http://uk.rs-online.com/web/search/s...duct&R=1591478

[dnar]

something liek this

http://uk.rs-online.com/web/search/s...duct&R=1591478

That's the stuff. Grab a splicing kit also.