Results 1 to 5 of 5

Thread: Couple of Lasers for Repair (Melles and RGB Systems)

  1. #1
    Join Date
    Jul 2005
    Location
    Kansas City
    Posts
    211

    Default Couple of Lasers for Repair (Melles and RGB Systems)

    I have a Laser Power (Before Melles bought them) 2.5W 532 Green with the beam combiner / collimator. Was doing about 1.5W up until about 2 weeks ago and it just quit and now has very low output. Probably the pump diode if someone wants a project $800

    Second is a 473nm Blue pulled from RGB system projector, 500mW when new. Was doing about 100mW when I pulled it about 1 month ago. It has two separate lasers and emits two beams. Good project as well. Make me an offer on this.

    Also still have the LaserScope With a scanner head I am trying to sell.
    Larry
    Attached Thumbnails Attached Thumbnails DSCN1726.JPG  

    DSCN1725.JPG  

    IMAG0102.jpg  

    DSCN1727.JPG  


  2. #2
    Join Date
    Apr 2006
    Location
    Miami, FL
    Posts
    3,580

    Default

    is that Melles on an ML-10?

    I think I built its twin lol



    would love to pick up another melles but my wallet would laugh at me

  3. #3
    Join Date
    Jul 2005
    Location
    Kansas City
    Posts
    211

    Default

    Yes , I had it on a ML10 for quite a while. Not sure what I am going to put on the ML10 now. I had actually already put 500mW of Red with it so May just do some blue now.


    Quote Originally Posted by flecom View Post
    is that Melles on an ML-10?

    I think I built its twin lol



    would love to pick up another melles but my wallet would laugh at me

  4. #4
    Join Date
    Jul 2005
    Location
    Flying over a town near you
    Posts
    1,404

    Default

    The Melles probably need a new set of crystals...either that or the fiber launch has toasted...more likely the first. The AR coating seems to be less than friendly after a few years. Used to have one set but have since been used...taken from a laser that had no pump diode that was purchased very cheap for parts...R code laser head...flea-bay...no driver either.
    I know that Fred at onestop had stocked parts in the past.
    You are the only one that can make your dreams come true....and the only one that can stop them...A.M. Dietrich

  5. #5
    Join Date
    Mar 2010
    Location
    Phoenix,Az
    Posts
    285

    Default Interested

    Quote Originally Posted by wondertwnz View Post
    I have a Laser Power (Before Melles bought them) 2.5W 532 Green with the beam combiner / collimator. Was doing about 1.5W up until about 2 weeks ago and it just quit and now has very low output. Probably the pump diode if someone wants a project $800

    Second is a 473nm Blue pulled from RGB system projector, 500mW when new. Was doing about 100mW when I pulled it about 1 month ago. It has two separate lasers and emits two beams. Good project as well. Make me an offer on this.

    Also still have the LaserScope With a scanner head I am trying to sell.
    Larry
    please e-mail me I am Interested godslightshows@gmail.com ATT; Emory
    BEAMANN (GODSLIGHT SHOWS)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •