Spectronika CuBr Laser and Projector

[Robin]

I need room for more lasers.

Included in the sale:

Spectronika CuBr laser
-It has a new tube with 10 hrs on it and is outputting 6 watts.
-It's also sporting a new thyratron.
-Specifications:

• Wavelengths 511 nm; 578 nm
• Green/Yellow Ratio 1.4/1
• Pulse Duration 30 ns
• Peak Power 8.8 kw (Estimate by the average P=5 W, f=19 khz and pulse length of 30 ns)
• Pulse Repetition Rate 19-20 khz
• Beam Diameter 14 mm (telescoped down to 7 mm)
• Divergence 2.0 mrad (full angle)
• Dimensions 110 x 36 x 25 cm

Specscan Projector
-The projector was made by Spectronika, and is spec'd quite nicely.
-Cambridge 6240 Scanners.
-Cambridge 678 Servo Amps.
-Stocker Yale R4-077-9 dichro actuators driven by boards made by Peter Mayer at Creative Laser.
-ILDA passthrough connector.
-Spring loaded beam shutter.
-110/220V switchable operation.

Support Equipment
-Safety goggles.
-220V single phase spider box.
-Documentation for laser, scanners, scan amps, and actuator driver boards.

Accepting offers.

Pics:


Accepting offers.

[flecom]

wow!! I have always wanted a CuBr but the wallet says maybe a $5 pointer is in the budget for the next year or so lol

[QUAZAR]

Very nice piece of kit.

[dsli_jon]

Hey there, Sir Robin...

Accepting offers.

Hrmm.. Perhaps we should 'chat'? http://www.photonlexicon.com/forums/showthread.php/13267-SAVE-THE-WHALES!...-(jk...-)-N%FC-Goodies-4-Sale...

..or, are you, too, just-after 'cold-hard cash / gold bullion'?

PM-if you wanna discuss...
peace..
j

[Robin]

..or, are you, too, just-after 'cold-hard cash / gold bullion'?

j

http://www.youtube.com/watch?v=_qO66Rmi1Mw

Slightly NSFW (language).

Beware the Leprechaun's: they're after me 578nm!

[Robin]

The buyer for this seems to have dropped off the face of the Earth. Since I haven't heard from him in a month, I'm putting this system back up for sale.

[Mel]

Are you still selling it?
Cheers...

[Picasso]

I place an offer of $1000.00 USD

[Robin]

It has a new home and unfortunately needs a new tube. I haven't been able to find a source for replacement CuBr tubes. The last time I spoke to the folks at Spectronika was right after they shut down and was told that perhaps replacements could be arranged in the future, but messages inquiring into that possibility have gone unanswered. So yeah, I guess life goes on. They were great people to work with and I loved that laser.

[danielbriggs]

Threadjack...

@Picasso:

http://www.ebay.co.uk/itm/201168714867





And see the copper bromide vapour swirl: