Removing 445 diodes?

[andy_con]

i know its on the forum somewhere i just cant find it, whats the name of the screw driver needed to do these screws?

[-bart-]

tri-wing or trigram

[andy_con]

many thanks .

[LaNeK779]

if you can spare one or two of these andy, please let me know

(although judging by your anamorphic prism inventory, there should be none left)

[andy_con]

sorry none left

[LaNeK779]

thought so, never mind

[andy_con]

when all else fails use the fooking mill...

[MechEng3]

Your joking rigth????? The shock and debris alone that can't be seen with less than a 10X would shorten the lifespan....I wouldn't dare. I will send you the bit if you won't do this for the sake of the diodes....but I guess I am a little too late...

[andy_con]

shock and vibration?? this is a solid table/vice

there was no shock and vibration. it was a gentle bit of milling the head of the screw.

[mccarrot]

If you use a 10bar air gun and tap it few times hard on the table to get the debris out you will be ok