Laserscope 700 & 800 water pressure

[andyf97]

Anyone know what is the usual water pressures of Laserscope 700 & 800 are.

I understand the 700 pumps are restricted to 99psi / 6.8Bar but what is a typical running pressure.

[Xytrell]

I understand the 700 pumps are restricted to 99psi

Those are tiny pumps! only 0.14psi per pump?! Can't you instead use one larger one capable of 100psi?

[Laserman532]

too much flow can hurt you, PSI dosnt matter because the orifices are large. you will be just fine if you can measure about 1 to 1.2 GPM flow. With an ion laser you have restrictions in this laser you dont (unless of course your laser has restrictions)

[dave]

too much flow can hurt you, PSI dosnt matter because the orifices are large.

HaHa, Pat said Orifice

[Laserman532]

one must mention orifice when discussing vag burners

[andyf97]

approx 35psi was the eventual answer

[Laserman532]

well sort of the answer...35psi only means something when based on a particular sized orifice....


lol...i said orifice again