I just released my latest E-book titled: " How To Make A Brainwave Activated Laser Lumia Effects RGV Projector "
Check it out here " http://www.sniffinfo.com/AweroraLumi...SalesPage.html "
Best regards
LaserLover
I just released my latest E-book titled: " How To Make A Brainwave Activated Laser Lumia Effects RGV Projector "
Check it out here " http://www.sniffinfo.com/AweroraLumi...SalesPage.html "
Best regards
LaserLover
Profile Redacted by Admin @ 04.24.2010
Last edited by lasersbee; 01-15-2011 at 05:26. Reason: Spelling errors
See the LaserBee II and all other LaserBee LPM products here....
All LaserBee Laser Power Meter Products
New 3.2Watt RS232/USB LaserBee II LPM REVIEW
Always in stock and ready to ship....
Subsidary:-Pharma Electronic Solutions
Hi, since we are getting close to "auraland " here !
Does anyone know the frequency used in the rectified high voltage generation used by enthusiasts for their Kirlian type "Aura" camera devices?
Not totally off thread (I hope1)
Congrats on new ebook
I echo lasersbee's sentiments (especially regarding the sensor end of things).
Cheers
Hi Jerry,
Yes, the e-book provides the schematic diagram of the circuits I designed to interface the EEG signal receiver to turn "ON" the lasers. The parts list is also available and I can recommend parts suppliers. The circuit is simple enough for any Electronics Tech to read and make your own circuit board/breadboard with a hand full of components. If you are comfortable with a soldering Iron, shop and power tools and have built electronics circuits from scratch, then you should be capable of tackling this project. If not, then find someone who can help you as I can only coach a person so far via email or over the phone.
Failing that, my prototype is also available for sale with the right offer.
Thanks for your interest
Rick
Profile Redacted by Admin @ 04.24.2010
***************************
Hi, Catalano
Kirlian photography is something I have played with many years ago.
I built a variable pulsed oscillator to pump some high current pulses through a hand wound winding of an existing color TV HV transformer. I don't recall the resonant frequency of those xformers but I think I was pulsing them around 10kHz using a 555 oscillator and push-pull power transistor amplifier. I'm sure you will find something archived If you poke around the internet. I rigged up a transparent electrode assembly so I could take live pictures or movies with a digital camera instead of exposing film plates using corona discharge. I could redesign a setup If i had time.
Start here " http://en.wikipedia.org/wiki/Kirlian_photography "
Cheers
Rick
Rick
Profile Redacted by Admin @ 04.24.2010
See the LaserBee II and all other LaserBee LPM products here....
All LaserBee Laser Power Meter Products
New 3.2Watt RS232/USB LaserBee II LPM REVIEW
Always in stock and ready to ship....
Subsidary:-Pharma Electronic Solutions
I have a lot of projects in the queue at the moment, but this one looks really interesting- neat stuff! I like it
Just read the E-Book...
Good Laser Safety info including Goggles... types of Lasers...
Filters and lenses...
Lots of links to Laser Safety and CDRH conformity sites...
Very detailed info on making the Lumia Lens Wheel....
Learned a few thing I didn't know...
Worth the $$$ for me just for the info...
Jerry
See the LaserBee II and all other LaserBee LPM products here....
All LaserBee Laser Power Meter Products
New 3.2Watt RS232/USB LaserBee II LPM REVIEW
Always in stock and ready to ship....
Subsidary:-Pharma Electronic Solutions