Smoke Machine Mod - Funny Video

[dnar]

This guys looks and sounds like he smoked a huge reefa before making this video!!!

Get ready to pretend this bit of paper is a top view of your smoke....... What was the question?

http://www.youtube.com/watch?v=siBYl6RUoYg

BTW, his schematic is incorrect. These cheap machines wire the pump and element (and switch) in series, with the N/C thermo switch in parallel with the pump. When the thermo switch is closed the element is powered and the pump is bypassed.

I did a similar mod to mine, adding a 2nd N/O thermo switch just for the pump, so that you can't pump fluid until the block is above 70c.

[djmatt]

Yeah, coming form someone who has worked on fog machines for years..
Its ok if its just in your home or shop and you use it just for like a tester,but nothing else..and if you do have it on the floor and not above you!! As not all the fluid will convert to fog, and high heat+hot fluid= serious burns That stuff is like cooking oil, it will burn after you have been hit
Just be careful!!!

DJ Matt

[Doc]

I didn't make to the end of the video, for some reason I got the munchies, ate a full pack of brownies and fell asleep.

Interestingly (or not) I am nearly done building a mini fazer from a Martin Magnum fogger I had sat here. My design does contain some control electronics and I plan on posting a thread on here when it's finished.

[Things]

I'm actually looking at creating a little circuit that will allow regular cheap fog machines to be used without in between warmup times, that doesn't involve just changing a few wires around. Not sure if/when I'll ever complete it, but it's a bit less hackier than his mod

[lasersbee]

Maybe it's because I'm getting older... but after listening for
a minute to this mentally challenged person trying to look for
his next word.... I fell asleep from boredom...


Jerry

[dnar]

I'm actually looking at creating a little circuit that will allow regular cheap fog machines to be used without in between warmup times, that doesn't involve just changing a few wires around. Not sure if/when I'll ever complete it, but it's a bit less hackier than his mod

Let me know when your ready, as I kludged my 700W China fog machine.

I fitted a 2nd bi-metalic thermal switch to the pump circuit, so it can pump fluid while the element is energized (but only when the heater block is hot enough).

Also, I replaced the hand remote with a custom controller that allows various periodic "quirts" as well as manual. Periodic squirts are best when you have a female heavy crowd.

[chad]

That dude is completely baked.

chad

[HD58PHD]

Stick a fork in him,he's done!

Uhhh,well,,uhhh,,, ROFLMAO!!!

[HD58PHD]

Ahhh,I think maybe he co-authored this one?





http://xkcd.com/730/

[flecom]

dude reminds me of Trent from the Daria cartoons