Laserlance here... Question

[laserlance22]

Decided to do some research and found some basic diagrams of transistors. No one specified the wattage necessary for the 470-ohm resistors. I bought 1/8 watt and also 1/2 watt resistors and they both have 5% tolerance. Any suggestions or do I just sorta try it out and hope it works! :-) LOL.

[LaNeK779]

Please tell me more. What do you mean by that? Thanks, Lance

i really liked the way that you use this 45deg cut tube and keep the kinematic mount parallel to the incoming beam. never seen this one before

[masterpj]

Well welcome to the community laserlance22
Looking forward to some of your shows
and of course those beams.

lol

Best regards,

Pieter

[laserlance22]

Thanks Master PJ. As far as the previous comment about the 45degree angle tubing with the dichroics, I can't take credit for that. It came from LaserWorld with the dichroics already on the stands. I just had to tap and mount them in the correct positions on the table and adjust them. I thought, "that must be how they're all done!!! LOL.

[laserlance22]

FYI: So I'm finally biting the bullet and buying a new 250mw green laser directly from Laserworld.
Hopefully, this will fix my blanking problem for my upcoming shows!

Thanks to everyone for your help on this.

~Lance

[allthatwhichis]

WHOA!!! Why would you buy another Laserworld product?! Surely you can find something of better quality. I recently received a DHOM green from CT Lasers that kicks major ass. Think about another vendor before you take that bait again...