Help Me Im A Noob

[flyingfireguy]

Hello,

I have a Laser With:
100mw Diode Green
LV60-08 Low cost scanners From Laser visuals..com
DMX-lasershow player LV12DMX From LaserVisuals.com

I have a programe that creates Ild files but how do i assign them to a dmx address and have it so when there isn't any dmx present it does Sound to light Or Auto?

Here Are some Photos http://s553.photobucket.com/albums/j...thew0o0/Laser/

Thanks
Matthew Adams

[borgqueenx]

hello. you cannot run ilda files through DMX settings.
DMX is only for adjusting various shows and patterns that are built in the DMX show card.
You cannot get your own made shows to view through DMX.
you need a ilda connector for that.

you can find alot of info on this forum

good luck to you as well!

[flyingfireguy]

So what type of files are the show files.

[borgqueenx]

So what type of files are the show files.

.ild or .ilda is perfect...for a projector with ilda interface connector.

But if you ment dmxfiles...there are none - every dmx show is preprogrammed on the dmx board and cannot be removed or replaced. You can only play a bit with the build in shows and effects using a dmx controller.