Aluminium plate - need it this week!

[borgqueenx]

i need a aluminium plate of 475 x 380mm, and 0,8 to 1cm thick.

I need it delivered this week.

Hopefully someone reads this in time ^^

Edit: done this can be closed! all thanks to edison for helping

[danielbriggs]

Could get you some for a decent price, but fast, heavy and international post do NOT make well for 'easy on the wallet' postal costs.

Are there no local metal suppliers in the Netherlands you can drive to?

p.s. Make sure you get 6082 or similar alloy; will cut, drill and tap well. Watch out for some sheet/shate dealers; check the alloy. You may get something akin to chewing gum; at least when you start drilling into it...

[stanwax]

?

p.s. Make sure you get 6082 or similar alloy; will cut, drill and tap well. Watch out for some sheet/shate dealers; check the alloy. You may get something akin to chewing gum; at least when you start drilling into it...

Like the stuff laserworld use!
Rob

[borgqueenx]

i didnt even look for quality...

its impossible to get aluminium close to me.
there is a webshop that could sell it to me for 45 euro in total but cant make the delivery in time.

and everyone who lives close to me....no go. i called 6 dealers in metal stuff...they all had no aluminium of 0,8cm, 0,9cm or 1cm.

[Badpip]

i need a aluminium plate of 475 x 380mm, and 0,8 to 1cm thick.

I need it delivered this week.

Hopefully someone reads this in time ^^

Try here: http://www.metallstore.de/

/Thomas

[Doc]

i didnt even look for quality...

its impossible to get aluminium close to me.
there is a webshop that could sell it to me for 45 euro in total but cant make the delivery in time.

and everyone who lives close to me....no go. i called 6 dealers in metal stuff...they all had no aluminium of 0,8cm, 0,9cm or 1cm.

Try ebay, there will be a machine shop somewhere that sells offcuts.

[borgqueenx]

Try here: http://www.metallstore.de/

/Thomas

i cant speak a single word german.

@Doc: i found some results from other countries....but again they cant make delivery in time...

[michelrietveld]

www.aluminiumopmaat.nl
and drive over there to pick it up is cheaper and faster than having them send it by postal service.

Michel

[borgqueenx]

www.aluminiumopmaat.nl
and drive over there to pick it up is cheaper and faster than having them send it by postal service.

Michel

Thats to the other side of the country:S

But edison was so kind to help me out
Updated post 1.

[masterpj]

Thats to the other side of the country:S

But edison was so kind to help me out
Updated post 1.

you can't have everything, if you really need that case and quick: I'd say you just go for it.