Catweazle Galvo Required

[stupidsexyflanders]

Does anyone have a catweazle galco i could buy. My X appears faulty , it barely moves even when i swap it to Y . Y works fine on x output so its not the driver. Thanks

or does anyone have a low cost complete set of galvos for sale

[sbk]

I had to replace a set of Catweazle in a friend's projector some times ago, because he lost the mirror.

The galvo itself seems ok, but without mirror it had some difficulty to reflect the laser... As the mirror is really easily exchanged (you just need to remove 2 screws and exchange the whole shaft incl. mirror), if your mirror is still ok, I can ask him if he still own the old head and send the galvo without mirror to you?

[stupidsexyflanders]

yes mirror is fine , just the galvo i require. Thanks. When replacing the mirror , does the whole thing just pull out as i didnt want to pull mine as im not sure what its attached too once you remove the small two screw cover.

[sbk]

Yes the whole thing pulls out. I'll ask my friend and tell you.
Is this hurry? As I'm not at home next week, it may delay a bit the communication..

Maybe can you post a picture of your galvos, to be sure they are the same one?

[Doc]

without mirror it had some difficulty to reflect the laser...

Now I have tea on my monitor

[VJ AIWAZ]

if you still need the scanner i have a bunch what type is it the old ones or the newer wide move xt

[stupidsexyflanders]

if you still need the scanner i have a bunch what type is it the old ones or the newer wide move xt

yes i still need , see this thread for a picture . Thanks.

http://www.photonlexicon.com/forums/...DAC-connection

[VJ AIWAZ]

yes i have a stack of those galvos if you would like to discuss further you can call me at the office the number is on my website


John

http://www.taiserver.com

[-bart-]

I've once read on the laserfreak forums that the bearing of a catweazle can become stuck.
Disassembling and reassembling of the mirror should do the trick.

[stupidsexyflanders]

yes i have a stack of those galvos if you would like to discuss further you can call me at the office the number is on my website


John

http://www.taiserver.com

sure when is the best time to contact you as i am in the UK . Or you can PM me with cost. If they are not to expensive i may take two (as backup) Thanks