- CTI6215 graphic scanners & scan amps
- DMX-controlled fader
- Use internal laser controller (Pangolin Flashback)
- Can also be run with external laser controllers such as Pangolin Lasershow Designer, Cypher, Phoenix, etc.
- Laser: Solid-state RGB diodes (red-green-blue or "white" light), or solid-state thin-disk 532nm (green)
- CW continuous-wave light -- no pulsing or "dotted lines"
- Air-cooled -- no water needed
- Available with a wide variety of laser powers, from 1 to 16 or more watts
- U.S. FDA/CDRH compliant
- One Year Warranty
- Mounting bracket
SCANNERPRO PROJECTOR SPECIFICATIONS
Weight: Varies depending on laser installedDimensions: Varies depending on laser installedAperture size: 3 x 4 inches / 7.6 x 10 cm (typical)Mounting style: Shelf / YokePower:
120/240 VAC, 60/50 Hz, 2/1 Amps
The ScannerPro is our scanner only projector. TURN-KEY, professional, affordable, the ScannerPro combines CTI 6215 scanners for high resolution image projection with the new LaserNet DMX control.
LaserNet’s quality starts with the lasers. All solid state RGB, air cooled diodes are rated at spec power or above. All scanners are the latest from Cambridge Technologies. The solid state 532 green laser is the latest in Germany technology, and features "thin disk" technology. Available in 8 or 16 Watts of CW power for mega hours of operation. CW means continuous wave, no pulsing for clear, stable graphic image scanning and beautiful aerial patterns.
Features:
Available in 1 to 16 watt models.
Professional Optical projector
Choce of CTI 6215 or 24K scanning systems
Choice of lasers color configuration:
635, 532, 473nm OR 640, 532, 440nm.
DMX Controlled fader
Solid State Diode Lasers RGB or
Thin Disk 532 Solid State Laser
Pangolin QuickShow Flashback system built in
ILDA compatible, uses any software
CDRH Compliant, One Year Warranty
Mounting bracket
Hi all, I'm new here. I bought a laser projection system in Seprtember of 2010, and have used it exactly 3 times, in the privacy of my own home. It works great, and the specs listed above are right on. Thanks for tkaing the time to look this over! Its 1200mw, if you go to LaserNet.com you can see the product specs. I cut and pasted most of the relevant info here, but the system is 1200mw.
BOUGHT FOR $15,000
SELLING FOR $11,000-With Quickshow Software, USB Box, 50ft cord, Mounting bracket.