For sale...will ship this or next month, depends on when i buy the new modules that i will replace them with.
a 100mw 532nm green module with TTL driver.
a 200mw 650nm red module with TTL driver, and cooling fan.
a 200mw 405nm blue/violet module with TTL driver, and cooling fan.
Buy all modules and drivers and you'l also get the PSU wich runs them both.
all modules are from CASA laserlight...and they run fine in my projector.
the green module must warm up 5 seconds before it outputs full power.
These modules are great for maybe a small laser projector project.
Sizes and availability:
532nm module= 65*33*33mm. --- shipped this month or the next.
650nm module= 56*31*32mm. --- shipped next month or the month after.
405nm module= 56*31*32mm. --- now able to be shipped.
driver sizes:
532nm driver: 76*50*35mm.
650nm driver: 60*35*20mm.
405nm driver: 60*35*20mm.
psu size(that feeds all laser modules): 70*50*42mm.
im willing to sell these for cheap. so PM me with an offer.
they are no use for me anymore once i have the new modules, so get them fast.
shipping worldwide: 25 dollar extra, with tracking code.
shipping europe: 18 dollar extra, with tracking code.
shipping in the netherlands(where its coming from): 8 dollar extra.
pictures:
green module and driver:
http://gdteam.net/images/lasers/modules/IMG_4321.JPG
red and bluray module(same outside look and size)
http://gdteam.net/images/lasers/modules/IMG_4324.JPG
Red and bluray driver(same size on top of each other)
http://gdteam.net/images/lasers/modules/IMG_4322.JPG
PSU:
http://gdteam.net/images/lasers/modules/IMG_4323.JPG
ignore the glue on these drivers and modules, i got the cables loose by carefully using a knife. so all cables can be unplugged, and plugged in again.
i did not glue them, CASA did, so i couldnt mess with the drivers. so there is nothing to worry about
warning: all modules may NOT be in touch with any metal. therefore it has a small piece of silicon under it.