I am selling my RGB projector, as I have decided this hobby is a bit too expensive for me now
Here is the thread of the build:
http://www.photonlexicon.com/forums/...5302-First-RGB
I have no way of measuring power or beam specs etc, but 2 of the lasers were new when fitted.
Red - Laserwave 200mw 635nm Model LWRL635
Blue - Laserwave 50mw 473nm(apparently doing 70mw as tested by Rob before I took possession) Mdel LWB 473 (Cost £400.00 ! )
Green - Unknown make 200mw 532nm
Galvo - Scanpro 20
3 x Laserwave 3 axis mounts
2 x Laserwave Dichro
DAC - Moncha Lite
There is also an addional PSU fitted to supply 5v, and +/- 12VDC
Dimensions are Width 445mm, Depth 490mm, Height 160. Weight - just under 15Kg
As you can see, it is built in a PC case. Front panel has a Hoya Skylight filter built in. I hadn't actualy tried this unyil I took photos, anf now realise it is fitted too high in the panel! If the projector is sold as a unit, I will move the aperture to suit if required.
I will also supply, if sold as a unit, the little test bos pictured - you can plug this into the modulation inputs (easily accessible) and control the intensity of each beam manually. This is useful for testing alignment etc. I will also supply a 445nm diode, O-like housing, Flexmod driver and blue lazorb!
Some pics - please note I didnt spend much time in aligning things, I figured this would need to be done again after shipping anyway.
Even if I only value the 473 at £50.00, there is still over £700.00 of parts in there.
I will pay shipping within the UK, but am not prepared to ship overseas, sorry.
I would hope for £400.00
Let me know what you think,
Cheers, David