RGB Projector

[xntrix]

I am selling my RGB projector, as I have decided this hobby is a bit too expensive for me now

Here is the thread of the build:

http://www.photonlexicon.com/forums/...5302-First-RGB

I have no way of measuring power or beam specs etc, but 2 of the lasers were new when fitted.

Red - Laserwave 200mw 635nm Model LWRL635
Blue - Laserwave 50mw 473nm(apparently doing 70mw as tested by Rob before I took possession) Mdel LWB 473 (Cost £400.00 ! )

Green - Unknown make 200mw 532nm
Galvo - Scanpro 20

3 x Laserwave 3 axis mounts
2 x Laserwave Dichro

DAC - Moncha Lite

There is also an addional PSU fitted to supply 5v, and +/- 12VDC

Dimensions are Width 445mm, Depth 490mm, Height 160. Weight - just under 15Kg

As you can see, it is built in a PC case. Front panel has a Hoya Skylight filter built in. I hadn't actualy tried this unyil I took photos, anf now realise it is fitted too high in the panel! If the projector is sold as a unit, I will move the aperture to suit if required.

I will also supply, if sold as a unit, the little test bos pictured - you can plug this into the modulation inputs (easily accessible) and control the intensity of each beam manually. This is useful for testing alignment etc. I will also supply a 445nm diode, O-like housing, Flexmod driver and blue lazorb!

Some pics - please note I didnt spend much time in aligning things, I figured this would need to be done again after shipping anyway.






Even if I only value the 473 at £50.00, there is still over £700.00 of parts in there.

I will pay shipping within the UK, but am not prepared to ship overseas, sorry.

I would hope for £400.00

Let me know what you think,

Cheers, David

[xntrix]

Reduced to £300.00, or make me an offer

[Lassie]

What would be needed to make this work in The Netherlands? voltage etc.?
And can u tell me what the shipping cost would be?

Cheers,

Ron

[xntrix]

Hi Ron,
Voltage etc is same as UK - 240V/50Hz

Freight would be expensive due to the weight - at least £50.00 I would guess - but I may be wrong.

[xntrix]

Now sold - Thanks

[haymaker]

Just wanted to say thanks to Xntrix for such a great transaction. The items were packed very well and survived the trip without any hitch.

If you every make a purchase from Xntrix you will not be disappointed.

Once again, thanks.

[catalanjo]

Just wanted to say thanks to Xntrix for such a great transaction. The items were packed very well and survived the trip without any hitch.

If you every make a purchase from Xntrix you will not be disappointed.

Once again, thanks.

I will second that and raise you !

Cheers