SpringLEM 1 - The Netherlands 18 June @ Rijswijk

[hobbybob]

Great, but remember if someone does bring along a gaslaser and needs this heavy connection, you have to reroute all the other cables.

Is the current 3phase connection you have a 16A, 32A, 63A or 125A 3phase connection ?
You can see that sometimes on the CEE-form connector else you have to look at the size.

In this case bigger means more power ;-)

[masterpj]

Great, but remember if someone does bring along a gaslaser and needs this heavy connection, you have to reroute all the other cables.

Is the current 3phase connection you have a 16A, 32A, 63A or 125A 3phase connection ?
You can see that sometimes on the CEE-form connector else you have to look at the size.

In this case bigger means more power ;-)

Red connector.
Shall I make a picture of it?

[hobbybob]

Red connector.
Shall I make a picture of it?

Hahahaha.... Red connector he says...

Well yeah make a picture, but also measure the diameter of the connector.
Then we'll know if it fits

[borgqueenx]

Red connector.
Shall I make a picture of it?

Dont cut the red wire!

[masterpj]

Dont cut the red wire!

Hmm sounds tempting.
Sorry for my delayed response.
I had an meeting in utrecht + picknick
Weather wasn't that great but 4 guys and 10 girls was win When I shouted peanut butter jelly time everyone joined ... lol

[masterpj]

Here is the socket. (the other 2 not ready made ones are the same types as this one)
I have to find my measure tape to give you the diameter if you still need it
IMG_0108.JPGIMG_0117.JPG

[Stoney3K]

That's a 400V/32A connection. Should be OK for most gas heads, as long as people bring the appropriate 400V->220V step-down transformer.

Laserwinkel's SP168 is fitted with a 16 Amp connector because that was the power available at the workshop and is BARELY sufficient to run it.

Also keep in mind that if somebody brings medium frame ions, you're going to need to supply and sink a LOT of water somewhere.

If anybody could be so kind to give me a lift next Saturday, I'll make sure the small argon and some tools are ready here and people can tinker about with my laser harp. Hopefully we can get the detection fixed by then.

[masterpj]

Hello Stoney3K

That would be very nice yes, thanks

[hobbybob]

Hello Master Pj,

My breakout box plus in directly into that connector.
Only thing is if people bring those large energy sucking ion frame cannons, we need the connection for that, and we will have to use some ordinary sockets for the Solid state lasers. Seeing that you got 3x32A 3phase on the premises, and thinking of the former use your house had, we will find some sockets we can use.

[masterpj]

Hello Master Pj,

My breakout box plus in directly into that connector.
Only thing is if people bring those large energy sucking ion frame cannons, we need the connection for that, and we will have to use some ordinary sockets for the Solid state lasers. Seeing that you got 3x32A 3phase on the premises, and thinking of the former use your house had, we will find some sockets we can use.

Awsome thanks.
if you need more information just let me know.