Hey Guys!
Want a bad ass, compact quad kit for your red or blue laser project? Here is your chance!
Edison asked me to take over a group buy for him so we can all get some more of these beauties out there. The deal is, we need to have an order for at least 22 of these to make it work. The price for the "Kit" No diodes, lenses or drivers is 200 Euro's (currently $280USD) plus shipping charges. Which is not bad for such a nice module! To start, Let's take a tour...
This quad module is a very compact kit made out of brass for good metallurgical stability and it's thermally conductive properties. It's a "knife edge" kit that utilizes brass flexure mounts to move and lock the mirrors for little or no maintenance.
The way the module works is it has slide adjustable screws for the flexure mounts and the double diode assemblies. Essentially, two of the beams are knife edged and the other two are knife edged and stacked above the latter. You end up with a beam configuration like this... "::" However it will like like a single solid beam exiting the module.
The brass flexure mounts are very nice. They are extremely sturdy and well designed. The thickness of them and the push/pull arrangement makes a firm mount for your knife edge mirrors.
The flexure mounts sit in the modules groove for a nice lateral fit while maintaining adjustability up and down the channel.
The diode holders are also well designed. Each one holds two height adjustable laser diodes that snugly fit the base of the diode can against the module. The diodes can easily be changed since they are not press fit.
As you can see here, the diode modules maintain good thermal conductivity to the base of the module while allowing adjustability.
All module kits come with diode/LASORB interface PCB which holds the diodes in place via two Allen screws and allows a LASORB to fit overhead. They are very similar to my LaserBug modules but are made to fit this module practically.
Additional Parts...
Since this is a kit and not a complete unit, It will need additional parts to populate it.
The Kit comes with these lens holders, Note: these are not lenses, just brass rings for holding a lens. For a red build, these lenses are the best way to go and cost $17.50 each plus shipping. They will work great for 638, 642, 650 or 658nm laser builds. Optionally, I can mount 4 of these lenses for $110 plus shipping. I will also chemically process the brass so it is black and will produce less artifacts that way.
Here are the lenses...
Another important option is dielectric mirrors. these are great to get the least power losses out of your quad module. Alternatively, you can just use alumanized mirrors but these are a great way to go. (Price is pending)
Next, you can add a TEC module to the unit for stability. This is a 20X20mm TEC rated for 5V @ 3A max. (Price is pending) There are 4 Nylon spacers that are included with the kit to sandwich the TEC between the base plate and the laser module.
And finally, an enclosure. The whole module with TEC is made to fit nicely in this Aluminum housing and is perfect for making a nice little beast of a laser module. The price is 75 Euros ($105USD)
All the prices here are set by Edison, I don't make a dime off of the sale of the components, only a discount on a few modules and a chance to get more of these units.
Here is what is included in the base kit for this quad module for 200 Euros...
1 - brass quad module base
2 - brass dual laser diode mounts
4 - brass flexure mounts
2 - laser diode/LASORB PCB's
4 - brass lens mounts
4 - nylon standoffs
28 - Allen screws
While I don't make money on the kits, I do make money on services I offer. If anyone is interested in having one of these quad modules but doesn't want to do the whole build or wants me to build a module for them, let me know! I'd be glad to custom build whatever you'd like for a good price using one of these kits. Unfortunately there are so many options, I can't quote a price on here but please PM me with your needs and we'll talk.
Please direct all questions about these modules to me and not Edison, If I can't answer your question I will have him answer it. He is too busy to handle the group buy and had me take it over for this reason.
Thanks!
Adam
Group Buy Participants:
300EVIL - 7 Kits
dilbert - 3 Kits info received PAID
tonyaztec - 1 Kit info received PAID
rgb-gas - 1 Kit (maybe 2) info received
j4cbo - 1 Kit info received
massivesound - 1 Kit info received PAID
Robin - 4 Kits info received PAID
ONLY 0 MORE TO GO!!