Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 29

Thread: New Projector Build

  1. #11
    Join Date
    Dec 2006
    Location
    Essex, UK
    Posts
    8,647

    Default

    once knfe edged together and passing throught all the optics you only get 2.5watts out. diodes are set to 1watt each
    Eat Sleep Lase Repeat

  2. #12
    Join Date
    Jan 2008
    Location
    Belgium
    Posts
    1,009

    Default

    So you're loosing 1,5W? (37%)

    I don't mean to piss on your work, its very nice, but would't it have been better to make the base plate a little bigger so the block for the prisms and the FET would fit on there completely?

  3. #13
    Join Date
    Dec 2006
    Location
    Essex, UK
    Posts
    8,647

    Default

    correct.

    that is how the driver is suppose to be and design error on my part for the prism pairs. but hey its not the end of the world
    Eat Sleep Lase Repeat

  4. #14
    Join Date
    Jan 2008
    Location
    Belgium
    Posts
    1,009

    Default

    Nice build nonetheless

  5. #15
    Join Date
    Feb 2011
    Location
    New Hampshire
    Posts
    3,513

    Default

    When you stated the 4x1 watt diodes were combining to produce 2.5 watt output, I took another look at your photos of the module. The second knife edge mirror in the foreground and the PBS look pretty bright. In an attempt to produce a more compact stacked beam I've been surprised at the loss associated with what seems like minimal vignetting or spill over the top edge of the mirror. Having had larger losses than I liked with a couple of cube/wave plate combinations I've ordered a few alternatives to trial and will post the results.

  6. #16
    Join Date
    Dec 2006
    Location
    Essex, UK
    Posts
    8,647

    Default

    did a bit of work today moutning things






    anyone got any good methods of protecting wires from edges going through base plates?

    Eat Sleep Lase Repeat

  7. #17
    Join Date
    Oct 2006
    Location
    Central Florida
    Posts
    7,067

    Default

    Looking good Sir! What are you planning on for red?

    For wires around edges I would say get some rubber gromets or use a dremel to round the edges of the plate.

  8. #18
    Join Date
    Dec 2006
    Location
    Essex, UK
    Posts
    8,647

    Default

    no red plans at the moment, but space left.

    cant use a rubber gromet as the base plate is 10mm thick.
    Eat Sleep Lase Repeat

  9. #19
    Join Date
    Feb 2010
    Location
    Melbourne, Australia
    Posts
    1,106

    Default

    Yeah, round the edges. This works fine in my projector with no issues for the 8 wires running through.

  10. #20
    Join Date
    Dec 2006
    Location
    Essex, UK
    Posts
    8,647

    Default

    finally finished the projectors.

    i wanted to take my time with this projector and get everything right and try future proof. Ive added a 5v 8amp psu for a red at some point.

    inside are dt40 scanners, 1w green and 2.5w 445

    everthing is mounted on two 10mm base plates

    the 445 can simple be unplugged without having to go onto the botton level, so it can be removed and worked on if need be.










    ive fitted 4 rubber feet




    the projector is fully sealed, with rubber around the edges, dust filters on the fans and AR window








    a few beam pics









    little and large

    Eat Sleep Lase Repeat

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •