Results 1 to 9 of 9

Thread: Warm up

  1. #1
    Join Date
    Mar 2011
    Posts
    25

    Default Warm up

    Hello,

    Excuse the newbee question.

    Discovered after a cold weekend that my system needs a bit of a warm up to become useful in green. Are there any devices to allow me to pre heat the diodes without having any output ? Can't really do a good show if i have to have a beam poking out the from the front for ten minutes.

    Regards

  2. #2
    Join Date
    Dec 2006
    Location
    Essex, UK
    Posts
    8,647

    Default

    Eat Sleep Lase Repeat

  3. #3
    Join Date
    Dec 2007
    Location
    Nottingham, UK
    Posts
    2,849

    Default

    ...or a TEC driver with a H-bridge. (can heat and cool the x-tal)
    - There is no such word as "can't" -
    - 60% of the time it works every time -

  4. #4
    Join Date
    Dec 2006
    Location
    Essex, UK
    Posts
    8,647

    Default

    link briggs ?
    Eat Sleep Lase Repeat

  5. #5
    Join Date
    Jul 2007
    Location
    Knoxville, TN, USA
    Posts
    3,154

    Default

    Just rig a "disable" switch on your shutter, which would allow you to generate a full-power beam for warm-up without a beam actually leaving the projector.

    In lieu of that, rig a metal plate (with a flat finish to prevent back reflection) to cover the beam aperture (which is a good idea anyway, since it could help protect the scanners and other optics in the aperture during transport.).
    This plate would act as a beam mask, and would also allow you to generate a full-power beam without the beam actually leaving the projector.

    I've used both methods, and they work fine.
    Chances are, your lasers in your projector are not (hopefully!) strong enough to punch through the metal in a shutter arm or an aperture cover plate!
    RR

    Metrologic HeNe 3.3mw Modulated laser, 2 Radio Shack motors, and a broken mirror.
    1979.
    Sweet.....

  6. #6
    Join Date
    Jan 2005
    Location
    Norway
    Posts
    1,303

    Default

    reverse power on a TEC and it will HOT\COLD on different side

  7. #7
    Join Date
    Jul 2006
    Location
    Connecticut, USA
    Posts
    2,478

    Default

    Randy said it.

    Shutter! A) You should have one in there anyway for safety. B) Much easier to just shutter your beam than reverse wiring.

    -Marc
    http://www.laserist.org/images/ildalogos/ILDA-logo_colored-beams_Corporate_150w.jpg

    ILDA- U.S. Laser Regulatory Committee

    Authorized Dealer for:

    • Pangolin Laser Software and Hardware
    • KVANT Laser Modules & Laser Systems
    • X-Laser USA
    • CNI Lasers
    • Cambridge Technology & Eye Magic Professional Scanning Systems

    FDA/CDRH Certified Professional LuminanceRGB Laser Light Show Systems


  8. #8
    Join Date
    Mar 2011
    Posts
    25

    Default

    No shutters in these, but I'll add some as noticed the ILDA connector has provision. Can anyone make and reccomendations.

  9. #9
    Join Date
    Feb 2010
    Location
    Melbourne, Australia
    Posts
    1,106

    Default

    Quote Originally Posted by colbee View Post
    No shutters in these, but I'll add some as noticed the ILDA connector has provision. Can anyone make and reccomendations.
    Should be spring loaded to ensure return to safe/closed position on power fail. A GM-20 or a rotary solenoid such as a Ledex should do fine.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •