Question

[Song]

Thank you for the help.
I like the word: Knowledge is power.

Song - That is the best advise I have seen as a reply. The laser module in question is in fact made of two lasers with different polarizations (one being vertical | and one horizontal - combined through a polarized beam splitter (PBS) cube to equal a +) if the optics or mirrors before the PBS get out of alignment you could get two dots :. I appreciate you reaching out to learn more about your product, seeking more knowledge should never be seen as a bad thing. This forum is here to put information out in the open, because knowledge is power. Please feel free to ask questions and learn.

-Adam

[Song]

Thank you for the help.

Do you mean two red beams? That is usually because the red is using two 640nm diodes combined with a PBS cube which has come out of alignment. Look at this thread for assistance:

http://www.photonlexicon.com/forums/...ight=laserwave

[sugeek]

Speaking of knowledge, I found a small information guide I put together a year ago and thought I lost. Attached is a PDF that might help you a bit with laser projector and laser related terms and concepts. This was a first draft please excuse mistakes.

Enjoy,
Adam

[Song]

Thank you, I really appreciate it. This is really what I need, thank you again.

Speaking of knowledge, I found a small information guide I put together a year ago and thought I lost. Attached is a PDF that might help you a bit with laser projector and laser related terms and concepts. This was a first draft please excuse mistakes.

Enjoy,
Adam