Very nice! What did it cost?
Very nice! What did it cost?
Love, peace, and grease,
allthat... aka: aaron@pangolin
I decided to splurge and get the big cube for $147. The 10mm and 12.7 mm are both priced the same at $105.
I will indeed. My post was made 5 min. after a rough visual because I was so impressed. I will post the exact part number tonight and check its reflection/transmission tomorrow. I still stand by the philosophy that you can get anything for money, but after shopping around this seamed like the cheapest of the high end PBS cubes and probably benefits largely from the fact that it is a narrow rather than the more expensive and lower performance broadband cubes.
The JML Optical part # is CP021388. I'll test it tomorrow.
i think it is CPO and not CP0 (zero)
http://jmloptical.com/product/Laser%...iant-1070.aspx
thanks for sharing![]()
"its called character briggs..."
You could be right on that one. Thanks. With regard to my performance measurements, I blocked 10 of the diodes of the 445nm module just after the second knife edge as I still do not have a proper wave plate and set the other 10 so that their combined output was 4.38W. When rotated to maximize transmission the transmitted power was 4.20W. When rotated for reflection the reflected power was 4.26W. The two optimal orientations were very close if not exactly orthogonal. The measurements were then repeated with an input of 8.75W and resulted in proportional power reductions for the two orientations. This may not be superior to other PBS cubes that I have not tested, but seams pretty good to me not only because it meets JML's specs, but also it eliminates of the need in some cases to operate at off angles. Also, they have a selection of other wavelengths such as 650nm and I am tempted to go ahead and fold this module also.