Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: My gig at the weekend...

  1. #1
    Join Date
    Feb 2008
    Location
    East Sussex, England
    Posts
    5,246

    Default My gig at the weekend...

    I just found some vids shot from a bit of a distance from the stage and they look pretty impressive, so I thought I'd share.
    This was outdoors, with a 1500W fogger and fan a bit upwind of the stage, and a bit of natural 'atmosphere'

    Lasers used were all mine. I'll let you guess what powers for a bit (unless you remember what I own!)...







    Frikkin Lasers
    http://www.frikkinlasers.co.uk

    You are using Bonetti's defense against me, ah?

    I thought it fitting, considering the rocky terrain.

  2. #2
    Join Date
    Aug 2009
    Location
    Auburn, Washington
    Posts
    824

    Default

    Nice!!!

    Using QS right?

  3. #3
    Join Date
    Feb 2008
    Location
    East Sussex, England
    Posts
    5,246

    Default

    1 FB3-SE, 1 FB3-QS and LivePro, which was on auto for these vids because I was shooting vids (well the last 2 anyway, the other 2 I was probably trying to help sort out some low voltage genny issues that plagued us all night!)
    Frikkin Lasers
    http://www.frikkinlasers.co.uk

    You are using Bonetti's defense against me, ah?

    I thought it fitting, considering the rocky terrain.

  4. #4
    Join Date
    Jul 2009
    Location
    Wollongong
    Posts
    78

    Default

    nice psy






    and the projectors were good to. What power are they?

  5. #5
    Join Date
    Aug 2008
    Location
    UK
    Posts
    5,704

    Default

    Nice.

    How were you running the Stairville in continuous or burst modes?

  6. #6
    Join Date
    Feb 2008
    Location
    East Sussex, England
    Posts
    5,246

    Default

    Fogger was on 20% volume and 20secs on, 15 secs off cycle.
    Powers are 2x 1.4W RGB's and 1x 3.5W RGB (with a significantly under-performing green that is waiting to be swapped out for replacement)
    Frikkin Lasers
    http://www.frikkinlasers.co.uk

    You are using Bonetti's defense against me, ah?

    I thought it fitting, considering the rocky terrain.

  7. #7
    Join Date
    Dec 2006
    Location
    Scotland
    Posts
    1,408

    Default

    Cool effects adam ...lookin good dude !
    In the beginning there was none. Then came the light - #1 UKLEM - 2007
    BUY UK LEGAL LASER POINTER :: NEW - Blue 460nm Laser Pointers

  8. #8
    Join Date
    Jan 2008
    Location
    Belgium
    Posts
    1,009

    Default

    Have you had any trouble with LivePRO and the combination of the SE and QS FB?
    The colour output is messed up on the QS when using LivePRO. Also the output of the QS is smoother than that of the SE.

  9. #9
    Join Date
    Feb 2008
    Location
    East Sussex, England
    Posts
    5,246

    Default

    Have you had any trouble with LivePRO and the combination of the SE and QS FB?
    The colour output is messed up on the QS when using LivePRO. Also the output of the QS is smoother than that of the SE.
    I worked through this issue with Pangolin some months back and it was fixed in release 2015 (iirc). Have you checked what version is available on the main site recently? I know someone had a 202x release not long back off the dev site.

    It was due to a rogue piece of code that was initializing for SE boards on startup of LP, regardless of what was connected (which was why you only saw the problem on QS boards). The issue also existed in Draw3D, Abstract, etc and I don't know if thats been fixed yet. They seemed fairly busy with other things at the time.
    Frikkin Lasers
    http://www.frikkinlasers.co.uk

    You are using Bonetti's defense against me, ah?

    I thought it fitting, considering the rocky terrain.

  10. #10
    Join Date
    Jan 2008
    Location
    Belgium
    Posts
    1,009

    Default

    Donwloaded the latest version off the site this week, but I'll have to check when I get home

    EDIT : I tried downloading the version on the site here at work and the file version says 5.1.720.2007 so I'm guessing version 2007?
    I can't open it and check any further ...

    guess I'll mail Bill for more info
    Last edited by FourDee; 07-14-2011 at 07:56.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •