Results 1 to 9 of 9

Thread: New blue 1 watt blue module

  1. #1
    Join Date
    Dec 2008
    Location
    veenwouden
    Posts
    2,580

    Default New blue 1 watt blue module

    He guys

    I have 2 1 watt blue modules for sale. Analog modulation up to 50khz and comes with powersupply. I have taken these out a 2 projectors.


    Wavelength (nm): 445±5
    Output power (mW): >1000
    Transverse mode: Near TEM00
    Operating mode: CW
    Power stability (rms, over 4 hours): <1%
    Warm-up time (minutes): <2
    Beam divergence, full angle (mrad): <1.5
    Dimensions of beam at the aperture (mm):3×4.5mm
    Operating temperature (℃): 5~40
    modulation: >50KHZ Analog
    Expected lifetime (hours): 10000


    They are brand new never used.

    2 available. Also available 2 scansets 30kpps. If anyone is interested shoot me a Pm
    Attached Thumbnails Attached Thumbnails P1100443.JPG  

    Last edited by edison; 04-16-2012 at 13:33.


    Interested in 6-12W RGB projectors with low divergence? Contact me by PM!

  2. #2
    Bradfo69's Avatar
    Bradfo69 is offline Pending BST Forum Purchases: $47,127,283.53
    Join Date
    Jul 2010
    Location
    Wilmington, DE
    Posts
    6,206

    Default

    Why is it sellers often never want to put a price on anything? What's the point? Everything I own is "for sale"... at the right price of course! So just posting that you have something for sale doesn't make a whole lot of sense. (Not picking on you directly Johan, just sellers in general.)

    PM send regarding scanners.

  3. #3
    Join Date
    Jun 2009
    Location
    The Woods, CA, USA
    Posts
    534

    Default

    edison, what can you tell us about the driver on those blues you have? Is that the same PT as the name most of us know for scanners?

  4. #4
    Join Date
    Dec 2008
    Location
    veenwouden
    Posts
    2,580

    Default

    I don,t know. I have taken these out two projectors. I just sell it as is.


    Interested in 6-12W RGB projectors with low divergence? Contact me by PM!

  5. #5
    Join Date
    Feb 2008
    Location
    East Sussex, England
    Posts
    5,248

    Default

    Yep, I think a price, or guide price should be compulsory on all sale ads, as should the location.
    Just enforcing those basics cleaned up a lot of crap from another forum I use, and reduced the number of 'Price??' and 'Where are you/it??' type responses on a thread.
    Frikkin Lasers
    http://www.frikkinlasers.co.uk

    You are using Bonetti's defense against me, ah?

    I thought it fitting, considering the rocky terrain.

  6. #6
    Join Date
    Dec 2008
    Location
    veenwouden
    Posts
    2,580

    Default

    Reserved till next week


    Interested in 6-12W RGB projectors with low divergence? Contact me by PM!

  7. #7
    Join Date
    May 2007
    Location
    1 hr from everything in SoCal
    Posts
    2,789

    Default

    Any far field pics to show how these are (or aren't) corrected?
    If you're the smartest person in the room, then you're in the wrong room.

  8. #8
    Join Date
    Aug 2008
    Location
    Seattle
    Posts
    220

    Default

    Quote Originally Posted by edison View Post
    I don,t know. I have taken these out two projectors. I just sell it as is.
    If this is the case, you may want to remove the part in your original post that mentions a warranty of 1 year.

  9. #9
    Join Date
    Dec 2008
    Location
    veenwouden
    Posts
    2,580

    Default

    Good point sorry my mistake offering warrenty becomes a habit lately


    Interested in 6-12W RGB projectors with low divergence? Contact me by PM!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •