In addition to Norty and Allthat's comments -
Each software suite stores the zone settings in its own zone files.
They are specific to the software in use, not the controller.
(Applies to projector & palette settings, as well)
The saved settings are loaded from the software zone or INI files either when the software starts, or when saved settings are manually loaded.
The LD2000 suite will share zone settings between the various LD2000 applications.
The FB3 / QS combination will use its own zone settings specific to that combination.
I haven't seen the released version of Beyond yet, but I imagine it works in a similar fashion, keeping the zone settings specific for it's software suite only.
BTW, If you use your controller hardware on different computers, you will have to readjust the zone / projector / palette settings for each computer (or manually copy the related files between computers).
Last edited by Stuka; 07-27-2011 at 16:40.
RR
Metrologic HeNe 3.3mw Modulated laser, 2 Radio Shack motors, and a broken mirror.
1979.
Sweet.....