Cool. I picked up an e-stop switch sans key.Twist to release.
I have a stack of 4 pin XLR's left over from a theater intercom system I build a while back. Man, have you seen the prices of 5 and 6 pin XLR's lately?The whole reason for 5 or 6 pin is I would like the 2 x status LED's at my end of the cable... I might just use CAT5 and be done with it!
Thanks for the replies guys.
This space for rent.
Hey Tony,
Looking at the draft manual, the diagram does not agree with the text "pin 4 is unused". Is the schematic below correct? Thanks for the heads up!!!
Clipboard01.jpg
BTW, no response from Rob yet, maybe he is away?
This space for rent.
Hi Wayne,
The schematic is mostly correct. I don't bridge the 2 sets of 2 wires for the interlock loop. They are bridged on the board. I use the spare wires that would have been bridged for other signals. Pin 2 is spare, though terminated on the board with no traces to the rest of the circuit. In my 2nd board when reversed wired on arrival, pin 4 would have been spare. As I corrected this, it is pin 2 that is spare as diagrammed.
Hi Wayne,
The schematic is mostly correct. I don't bridge the 2 sets of 2 wires for the interlock loop. They are bridged on the board. I use the spare wires that would have been bridged for other signals. Pin 2 is spare, though terminated on the board with no traces to the rest of the circuit. In my 2nd board when reversed wired on arrival, pin 4 would have been spare. As I corrected this, it is pin 2 that is spare as diagrammed.
generally speaking, is it a good idea to have a foot switch, pedal or whatever instead of a hand operated switch?
no specific reason for asking, it just crossed my mind
"its called character briggs..."
In that case, a big push button you can hit with your head will cover all disability scenarios.![]()
This space for rent.