USB extender (over IP)

[stissot]

RE
my OS is Windows 7 64 Bits.
Ethernet hub Is Netgear GS108

The Ethernet Hub Drive Belkin Server (with my 3 DAC FB3) and My QM 2000 Pro with my other Laptop workin under WinXP SP3.

And i have No problem with latency Time under USB Server & Ethernet Link for Belkin & QM2000.net enclosure.

I Use Only the Wired RJ45 CAT 6 cable.
I dont make any test with Wi-Fi protocol,personnaly is not stable (NOT secure for streaming data drive Laser under This Media ).


Regards S.

[norty303]

No problems with latency maybe but what happens if you let it idle for half an hour or physically disconnect the USB at the hub then reconnect?
Btw Bill said fb3.net is due Xmas this year in the Beyond thread.

[flecom]

No problems with latency maybe but what happens if you let it idle for half an hour or physically disconnect the USB at the hub then reconnect?
Btw Bill said fb3.net is due Xmas this year in the Beyond thread.

I'll bet its going to be more than $100 tho!

might have to pick up one of those Belkins to play with

[badger1666]

i just as well use a usb over cat5 extension lead ,if the belkin is not stable over wifi
i think if pango are going to be to busy with beyond, better make that next xmas for fb3.net

[dnar]

I'll bet its going to be more than $100 tho!

might have to pick up one of those Belkins to play with

Here in Aussie, they are $159.

[colbee]

Google for usb over network by fabula tech, works a treat

[hivelaser]

I have one of these USB belkin hubs i wanted to sell anyone interested? I used it sometimes in a club but i switched everything back to DB25, its easier to deal with, and since all my cables are on nice cable drums i dont need it anymore, when i was using it wired or wireless it was working like a charm.

[badger1666]

Google for usb over network by fabula tech, works a treat

i have seen other companys making this sort of software. but myself i dont fancy hanging a pc off the back of my projector just so i can use an fb3
over the network

[colbee]

i have seen other companys making this sort of software. but myself i dont fancy hanging a pc off the back of my projector just so i can use an fb3
over the network

Noted. Depends on your application I suppose, but it certainly saved me a few hundred meter run of 25 core cable.

Tried the Belkin, had it lock up the FB3 after a laser enable/disable every time. This has worked a charm for me though.

[dnar]

Well I tried a set of USB over Cat5 extenders, it works spasmodically, due I am sure to the USB 1.1 limitation.

I tried plain old Cat5E wire to extend USB. It works great with a 10M cable, with 30M connected Windows complains it does not know what device is connected...

Off to buy a Belkin USB over IP hub. Wish me luck!