1W 532, 2W 445, should look good, or if your really on a budget 1W 532 1W 445
1W 532, 2W 445, should look good, or if your really on a budget 1W 532 1W 445
Sats can be DMX, Jon at Technological Artisans sells a DMX board inexpensively.
I'll post a pic of a minimalist satellite soon.
Steve
with the cost of an FB3 being what it is I don't think DMX is a good route to go... its going to give you minimal control over the projector
just get one FB3 for your two satellites and invert your X signal on one of the projectors
If you have a spare colour channel on your existing FB3, unless you want separate X&Y for your satelites, you should be able to use the same X&Y (in parallel) and drive the satellites off the 4th colour. You can tune the 4th color channel to receive a sum of all 3 colour signals, or whatever combo you like.
Too many options!!! Argh!!!
The disease is fatal I fear, Dave is dangling another 2 pair of galvos under my nose and I'm twitching...
Thanks for all the ideas guys! Your all bastards and responsible for my decline in wealth!!!
This space for rent.
I got a nice 'argon' out of 1W 532 and 1.5W 445.
I would echo Dave and say build them as 'argons' but leave space to make them RGB, it'll save tears in the long run.
RGB satellites rule
that said, I'm still toying with 'another' pair of bigger satellites, maybe 2W 532 each
Frikkin Lasers
http://www.frikkinlasers.co.uk
You are using Bonetti's defense against me, ah?
I thought it fitting, considering the rocky terrain.