Results 1 to 7 of 7

Thread: New to Lasers...

  1. #1
    Join Date
    Oct 2011
    Location
    Cambridge, MA
    Posts
    8

    Laser Warning New to Lasers...

    Hey all, new here... and to this field in general! I recently bought a DMX controller, laser machine, and fog machine: (details at this site: http://www.extremelasers.com/EN-5RGY.htm and http://www.extremelasers.com/ED-174R.htm) basically... I have no idea what I'm doing. I hooked up my DMX controller to the laser machine, and I know enough to know how to get an automatic show and sound activated show standalone from the laser, and how to turn the DIP switches so that the controller is on 1. However... how do I do anything from there??? I've tried searching for some help but frankly everything is at a level where I'm at... Any tutorial videos or advice here would be awesome! basically whenever I fiddle with the DMX controller, it just speeds up the two red and green lasers going in odd circular patterns.

    On a second note, I'd also like to be able to use my own graphics. I have poplescan and Moncha 2.1, can make some cool graphics on there....HOWEVER, I cannot figure out a way to go from my computer to the Laser.... guessing I need to buy some sort of hardware for that (any suggestions?)

    Thank you all for your most generous help... it's much appreciated!

  2. #2
    Join Date
    Aug 2008
    Location
    UK
    Posts
    5,704

    Default

    Please:

    1. Fill in your location (will help others to help you with local regulations)

    2. Type and power of laser

    3. What do you know about safety? - Simple question because lasers are not like other lighting effects, they can do real and permanent damage to people's eyesight

    4. On the control point of view, software isn't enough. You need a DAC (digital analogue convertor) that works with the software you have, and ILDA cable and your projector MUST have an ILDA connector:

    eg.

    Last edited by White-Light; 10-15-2011 at 10:38.

  3. #3
    Join Date
    May 2008
    Location
    Once it was called "Bel Paese" = ITALY
    Posts
    858

    Default

    Wait a while, please....
    Do you REALLY paid 999 Dollars for this device????????????
    http://www.extremelasers.com/EN-5RGY.htm
    I highly hope you are kidding......
    my webpage
    http://stevemilani.jimdo.com
    Skype ID: stevemilani957

    my RGB analogue projectors:
    3.9 W (640/532/445) 30kpps
    2.6 W (655/532/450) 30kpps
    2.5 W (638/532/450) 30kpps
    0.7 W (test unit)(635/532/473) 18kpps

  4. #4
    Join Date
    Aug 2009
    Location
    Auburn, Washington
    Posts
    824

    Default

    If you only have DMX input on the projector, look in the manual and somewhere it should tell you what controls what with DMX.

    It is probably pre-loaded with patterns and you can not add more.

    At least you bought a legal laser projector (2 - 4.95mW R &G). I probably shouldn't tell you that Amazon has the exact same projector for $300 less, which is still about $500 too much IMO.

    If you can return it, there are people here that can build you a real (and legal) laser projector for the same $. One that you can control how you want and add graphics to.

  5. #5
    Join Date
    Oct 2011
    Location
    Cambridge, MA
    Posts
    8

    Default ok...

    Quote Originally Posted by Phredy1 View Post
    If you only have DMX input on the projector, look in the manual and somewhere it should tell you what controls what with DMX.

    It is probably pre-loaded with patterns and you can not add more.

    At least you bought a legal laser projector (2 - 4.95mW R &G). I probably shouldn't tell you that Amazon has the exact same projector for $300 less, which is still about $500 too much IMO.

    If you can return it, there are people here that can build you a real (and legal) laser projector for the same $. One that you can control how you want and add graphics to.
    hmm, alright. well I paid about half that due to negotiation... however, it sounds like to get a legit laser I should have came to you first. I'm going for quality in my laser show here, so I'll return this thing and I'll need some advice on what to buy from you guys! I need to have this laser show done by the 31st... so time IS of the essence, so the sooner the better! (but cooler the better is well!)

  6. #6
    Join Date
    May 2011
    Location
    USA
    Posts
    117

    Default

    Quote Originally Posted by Steve Milani View Post
    Wait a while, please....
    Do you REALLY paid 999 Dollars for this device????????????
    http://www.extremelasers.com/EN-5RGY.htm
    I highly hope you are kidding......
    I LOLed at this response

  7. #7
    Join Date
    Jul 2006
    Location
    Connecticut, USA
    Posts
    2,478

    Default

    disco-

    Are you by any chance at MIT?? I got an inquiry today (just received it about 20 minutes ago, so if this was you, i didnt want to call you at 9:30 on a sunday). if it wasnt you, well- doesnt matter.

    OK, a few things...

    1) I am assuming you are looking to "own" this equipment and not just use it for a 1 night event?

    2) If this is going to be above 5mW (which obviously it will) and will be turned on in public, you need to have certified equipment and a variance to operate the equipment. (we can talk and discuss this regulatory stuff).

    3) A good laser show is not all about laser power. You need a good software/hardware control and you need to be able to "perform" (or artfully program) your display. You can have a 100 Watt RGB super duper laser and not have any artistic, passion and/or good hardware control and the laser will look like a blinkie twinkie bought off of Ebay for $500.

    Its good to see you came here for questions/aswers. Most people (myself included) would definitely suggest Pangolin's Quick Show to get you started. And perhaps starting around the 1W-1.5W range if going for an RGB setup.

    A *REALISTIC* budget should be in the $6500+ range if you are looking for a system built for you. If you build it yourself, perhaps the $5K range to get you going.

    -Marc
    http://www.laserist.org/images/ildalogos/ILDA-logo_colored-beams_Corporate_150w.jpg

    ILDA- U.S. Laser Regulatory Committee

    Authorized Dealer for:

    • Pangolin Laser Software and Hardware
    • KVANT Laser Modules & Laser Systems
    • X-Laser USA
    • CNI Lasers
    • Cambridge Technology & Eye Magic Professional Scanning Systems

    FDA/CDRH Certified Professional LuminanceRGB Laser Light Show Systems


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •