Cool build!! I never through of mounting the quad right in the case like that.
Mike
Cool build!! I never through of mounting the quad right in the case like that.
Mike
OK well I checked out of work early today eager to get home and start wiring everything up. Looks pretty good. I need to get some zip ties tomorrow to get it looking tidy inside before i take inside pictures. I also need to make a small 12v driver for the fans inside. I still need to get the front plate cut and painted and get a window. I have no idea what to get. Then I want to make it sealed completely and get good filters on all the fans, possibly isolate the optics/lasers from the rest of the case. And finally I need to get the I/O plate cut and painted.
Fired it up real quick, OMG galvos mirrors are clicking together!!!! checked them out they are fine no sign of damage. Playing the pt-itrust works ok. but thats no good for tuning the dichros. I did my best but couldnt get it right. I spent most of the night trying to get a signal from my audiolase dac /spaghetti. It worked with my shitty 15k scanners, but doesnt seem to work with my PT-30ks. Looking at my volume control while playing test pattern shows full blast but i get no movement on my scanners what so ever and no signal to my modulation. Im going to get my multimeter out later and test the ILDA cable to see if its actually outputting anything. I hope I didnt damage the audiolase with EST while bulding this thing. It was kinda neglected and tossed in a corner during the build mayhem.
I will take pics of the inside tomorrow after I get some zip ties. Heres a video of the PT-Itrust show clip.
looking really good!!! well done!!! maybe i should not throw away my own pt itrustboard after all. should come in handy for a quick demo![]()
"its called character briggs..."
DSCN2036.JPGDSCN2037.JPGDSCN2038.JPGDSCN2041.JPGGot some zip ties. And as promised here are some pics of the guts.
Question. I want to use a fused power switch, how do I go about calculating how big of a fuse I need to use. Would this number also be the minimum power I should look for If i expect to run the laser off a gas generator?
a quick and dirty way is to add the wattage of all the circuits you have connected to the mains power and then divide by the mains voltage.
i.e. all the power supplies of your lasers and the switcher that feeds the galvos. i don't think you should need more than a 3-4 amp fuse
"its called character briggs..."
Got QS on weds, last night got to take some decent video.
Nice video; what was the sound track?
Last edited by allthatwhichis; 10-15-2011 at 19:07.
Nice.
Watching it full screen though, I'd say try a little less smoke, it looks as if you might have over smoked the room. If its too thick it reduces the brightness of the beams just as much as if its too thin.