Page 3 of 3 FirstFirst 123
Results 21 to 25 of 25

Thread: My first projector Build Thread

  1. #21
    Join Date
    Aug 2008
    Location
    UK
    Posts
    5,704

    Default

    Quote Originally Posted by whatsupadrian View Post
    Thanks, Pretty Lights- Finally Moving Remix



    I have the cheapest $20 fog machine, i want to upgrade it soon. no timer or anything
    With the greatest respect, a timer alone won't save you from over fogging.

    What you need to do is start to learn the correct level through practice and experiment. With 2.5 watts you'll be able to punch through very thick fog, but it doesn't mean that the beams couldn't be brighter. In my experimentation, I found that with fog, there's a very fine line between under fogging, perfect and over fogging. Anything that falls outside of perfect starts to show a fall off in brightness and definition. The more laser power you have the less critical it is as the beams will still be acceptable for longer, but you still are under selling yourself when you beams could be brighter and clearer. Experimentation is the key so you start to recognise the optimum level visually. What you do then is set the optimum level, start your display and just top up with small amounts as and when needed when the fog starts to drop off which again you can assess by the drop off in beam brightness.

    Also, a very good tip I learnt from others on here is to use a fan to distribute the fog more evenly within the room.

    Best of all, if you can afford it, get a hazer. Produces much better results and can allow you to work in a room with no visible haze (although obviously its there). You can still over haze with a haze, but it becomes a lot harder as the smaller particles don't block the light as much. Also, its easier to spot because of the fact that you can normally run a very clear atmosphere with haze, so if it starts to look misty and foggy, you have a clear indication you need to back the hazer off. With fog the difference is between medium and thick fog so harder to spot when over fogging other than by observing the effect on beam brightness.

  2. #22
    Join Date
    Apr 2009
    Location
    Southern California
    Posts
    50

    Default

    Quote Originally Posted by White-Light View Post
    With the greatest respect, a timer alone won't save you from over fogging.

    What you need to do is start to learn the correct level through practice and experiment. With 2.5 watts you'll be able to punch through very thick fog, but it doesn't mean that the beams couldn't be brighter. In my experimentation, I found that with fog, there's a very fine line between under fogging, perfect and over fogging. Anything that falls outside of perfect starts to show a fall off in brightness and definition. The more laser power you have the less critical it is as the beams will still be acceptable for longer, but you still are under selling yourself when you beams could be brighter and clearer. Experimentation is the key so you start to recognise the optimum level visually. What you do then is set the optimum level, start your display and just top up with small amounts as and when needed when the fog starts to drop off which again you can assess by the drop off in beam brightness.

    Also, a very good tip I learnt from others on here is to use a fan to distribute the fog more evenly within the room.

    Best of all, if you can afford it, get a hazer. Produces much better results and can allow you to work in a room with no visible haze (although obviously its there). You can still over haze with a haze, but it becomes a lot harder as the smaller particles don't block the light as much. Also, its easier to spot because of the fact that you can normally run a very clear atmosphere with haze, so if it starts to look misty and foggy, you have a clear indication you need to back the hazer off. With fog the difference is between medium and thick fog so harder to spot when over fogging other than by observing the effect on beam brightness.
    wow, i didn't realize how technical fogging is. I plan on using this cheap fogger until I save enough to buy something quality, because i only want to buy 1 more fog/hazer in the future, and I plan on using it outdoors. I wanted to keep the the price under $300 though.

    I appreciate the tips, I will really pay attention to the fog next time I get this thing running.

  3. #23
    Join Date
    Aug 2008
    Location
    UK
    Posts
    5,704

    Default

    I can only talk of my experiences in a small room with 700mw.

    The more powerful your laser, the more you get away with as the laser itself can punch through the fog better.

    If you're planning on using it commercially or just want a very good hazer and have the pocket for it, then many of us would recommend the Unique Solutions 2.1. They're German made and very good quality although I have seen some reports around the web of some failures but then again you can find that with anything and there is a specific shut down procedure that can cause problems if not followed. They are around $1,100 I believe in the US. There's also the Martin magnum 2500 which is slightly cheaper. I can't comment on the 2 back to back as I've only seen the Unique in person.

    Failing that if you want fog, there are lots of options.

  4. #24
    Join Date
    Jul 2009
    Location
    The Netherlands
    Posts
    1,473

    Default

    Quote Originally Posted by whatsupadrian View Post
    Hello

    I have been building my first laser projector and I am finally making some progress. Most of the gear I have gotten from ebay and here @ PL.

    So far the materials I have.

    12"x16" 6061 Aluminum Baseplate
    15k scanners CDS, more like 14k- upgraded to pt-30k
    1w Aixiz 445nm Analog
    400w Meierlight 532nm Analog
    a-140 projector dichros
    4x lpc-826 LOC 660nm
    I think your colorbalance is off. Mixing 1W of blue with 400W of green will result in a greenish white..
    And where did you get that 400W beast ? Must be a helluva pump diode in there ?
    I am just kidding, i know you meant 400mW but couldn't resist. Welcome to PL and nice build , keep us posted of any updates !
    I didn't fail !
    I just found out 10,000 ways that didn't work.

  5. #25
    Join Date
    Apr 2009
    Location
    Southern California
    Posts
    50

    Default

    Good call, fixed my post.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •