Need some advice howTo combine beams ;)

[liteglow]

I take them

shipp them ASAP with 4 mirror mounts if you have ?
And if you got L mounts I take them 2

And if you got something else, damn I take that also !!


I just tested my Blanking on the BLUE laser.. and it was NICE and CLEAN !
wooo I cant wait to start this project so I hope you got time to shipp Junkx!?

[Astroguy]

I checked the RGB dichros in the DLP color wheel and they are way better than I thought. I can't figure out a way to put a table here so check my web site for the performance chart:

http://junktronix.com/DLP-RGB.htm

I would recommend combining the same way as my RGB projector

- combine green (pass) with red (reflect) using the green filter
- combine red/green (pass) with blue (reflect) with the red filter

The filter wheels look like this:

They'll need cleaning which is easy since the dichro coatings are tough and difficult to scratch. I use ispropyl and lens cleaning tissue. The filters are glued onto the wheel. I mark them with a carbide tipped scribe and they snap right off. For PL members, $15 each plus shipping ($4.05 Priority Mail in the US)

Is that $15 per wheel or per color?
And how much do you sell mounts for?
I am interested also.

[liteglow]

I`m still waiting on that PM from you...


I got my PayPal ready to click...

[Junktronix]

Is that $15 per wheel or per color?
And how much do you sell mounts for?
I am interested also.

$15 per wheel.

MM1's are $25 or $35 with a small dielectric mirror attached (high power, >98% reflectivity). I have mostly clone MM1's left, but they are nearly identical. Add $5 if you must have Newport labeled MM1's.

I have 8 of the L-brackets right now, but will get more made up. They have mounting holes for the mm1 at 1" or 2" off the table. $10 each on these.

[Junktronix]

I`m still waiting on that PM from you...


I got my PayPal ready to click...

Let me know exactly what you want and I'll let you know the price. It's tto late to ship today, but no problem getting them out tomorrow USPS Global Express.

[buffo]

Hey Liteglow!

I thought you wanted some of those Newport optical mounts from that E-bay auction???

Dude - I've already got a snipe programmed for those mounts. I told you that several days ago in the other thread... If you don't want them, don't you think you should have maybe told me?

Granted, I've still got 18 hours left to cancel it, but if I hadn't seen this thread then I would have gone ahead with the E-bay purchase... And then been stuck with 12 mounts when I can only use 4-6 of them tops...

What gives? Do you not want them? If so, TELL ME NOW so I can cancel the auction snipe that I've pre-programmed with AuctionSiper...

Adam

[liteglow]

sorry buffo about that ... My mistake !!
I was not sure what was going on about that auction.
First it was a BUY NOW price there.. and a bid.

Then I got e-mail from eBay that say "you did not win this item"
So I did think that is was GONE !

Then I did notice that it was back again with a BID one more time...
I did try to bid on it, but there was only "dont ship to your country"
So i did ask the seller if there was a Buy Now price and if he can ship to Norway..
The quick and only answer I did get was "NO" !!!

So I dont know about that seller, I more want to buy from Junktronix (As I trust him more)

And sry I again about tat auction BUT if YOU want some of the mounts ?
And if you did think that I buy half of them.. I will ceep what I did say, and buy them of you so it`s up to you.. (I got the money and I can use them later)

But I will also buy the mounts from junktronix as planned..


once again sry if you think I did leave your plans alone

[cruch]

Buffo: u got thees mouns ?

[buffo]

Yeah, I won the auction. They haven't been delivered yet; I expect I'll have them by the end of the week though.

Adam

[liteglow]

Ok, here is 2 pictures I did make in PAINT..
To figure out how i`m going to mount the lasers.

Is this the correct way to do it ?







Yes I did use 2 mirror on each laser to adjust the PARALELL heigt on the beam.
As I DONT have any adjustemnt on the laserhead itself (and dont know how to make one)


So what do you think, is this a setup I can use for real ?