Results 1 to 3 of 3

Thread: Selling 650nm 500mw & 635nm 300mw laser modules. Also have PS for 445nm Lasers.

  1. #1
    Join Date
    Apr 2011
    Location
    Laguna Beach, CA
    Posts
    81

    Default Selling 650nm 500mw & 635nm 300mw laser modules. Also have PS for 445nm Lasers.

    FOR SALE:

    650nm 500mw Laser module with TEC and Fan. TTL modulated. My coherent power meter reads 653mw. I have had this for a few months. It was installed but never put into use.
    Price $200.00

    Product's Technical Parameters: Manufactured by SNOC Lasers.

    ● Wavelength: 6505nm
    ● Output Power: >500mw
    ● Beam Mode: Near*TEM00(means the beam is not fully dot)
    ● Operation Mode: CW
    ● Cooling Mode: TEC+Fan
    ● Power Stability: 3%rms,4hour
    ● Warm-up Time: 5min
    ● M2 Factor <20
    ● Beam Divergence,Full angle: <3 mrad
    ● Beam Height At Aperature(1/e2* Representative Value): ~6.0mm
    ● Beam Height From Base*Plate: 55mm
    ● Spectral Linewidth: <1.5nm
    ● Polarization Ratio: >50:1
    ● Pointing Stability After Warm-up: <0.05mrad
    ●Operating Temperature: 10~35℃
    ● Expected Lifetime: 10000 hours
    ● Net Weight: 1.5kg
    ● Dimension: 80mm*40mm*30mm
    ● Power Supply(80~260VA): 110-250V
    ● TTL Modulation: * *

    Attachment 27347

    635nm 300mw laser module with TEC cooling and TTL Modulation. Another module that was installed but never put into use. My coherent power meter reads 345mw.
    PRICE is $275.00


    Product's Technical Parameter: Manufactured by SNOC Lasers.

    ● Model No.: L635-300
    ● Wavelength: 6355nm
    ● Output Power: >300mw
    ● Beam Mode: Near*TEM00
    ● Operation Mode: CW
    ● Cooling Mode: TEC+Fan
    ● Power Stability: 3%rms,4hour
    ● Warm-up Time: 5min
    ● M2 Factor <2.0
    ● Beam Divergence,Full angle: <3 mrad
    ● Beam Height At Aperature(1/e2* Representative Value): ~6.0mm
    ● Beam Height From Base*Plate: 55mm
    ● Spectral Linewidth: <1.5nm
    ● Polarization Ratio: >50:1
    ● Pointing Stability After Warm-up: <0.05mrad
    ●Operating Temperature: 10~35℃
    ● Expected Lifetime: 10000 hours
    ● Net Weight: 2.5kg
    ● Dimension: 152x55x50.2mm
    ● Power Supply 80-260VAC
    ● TTL Modulation: 0-30K
    *

    Attachment 27348Attachment 27349Attachment 27350


    Laser Driver and supply with ability to control your TEC cooling on your diode along with a fan output. TTL Modulated. Best using this with 445nm diodes.
    Price $40.00


    Attachment 27351Attachment 27352Attachment 27353

    Shipping will be priced depending on your location and the weight of the item. Payment should be made using Paypal. Send me a
    PM and I will provide the details.

  2. #2
    Join Date
    Dec 2009
    Location
    MI, flint, farmington hills
    Posts
    569

    Default

    God if i had more money i might just buy everything you sell...
    What twice now right?
    maybe next week i may pick this up.
    Man why do college classes cost so darn much.
    college vs lasers. i might have to rethink my life...

  3. #3
    Join Date
    Feb 2011
    Location
    Missouri, USA
    Posts
    50

    Default

    I'm with you kiyoukan. If only they had a major for Laser Shows! Then budget would never have to be such a big fat problem...
    Pointers
    O-Like 532@100mW & 650@200mW
    Survival Laser 445@1.1W
    Projectors
    Homemade Variable RPM Lumia Box 405@500mW & 532@100mW & 650@200mW & 460@1.3W
    Kvant CM6000 with ScannerMAX 506 30-40k galvos - 637@1.3W & 532@1.8W & 445@3W + DMX Lumia Gratings
    Self-Repaired 532@500mW + Pangolin FB3, Chinese Galvos, Analog Modulation
    Tools & Software
    Radiator Laser Synthesizer
    LaserBee USB 2.5W thermopile meter
    Spaghetti, RIYA Multibus Lite
    Pangolin QuickShow, Beyond Advanced, integrated FB4

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •