Results 1 to 3 of 3

Thread: SP 164 Argon + SP168 Argon/Krypton White Light Lasers FS

  1. #1
    Join Date
    Mar 2006
    Location
    Ottawa, Ontario, Canada
    Posts
    489

    Default SP 164 Argon + SP168 Argon/Krypton White Light Lasers FS

    Hi folks,

    I have a Spectra-Physics 164 Argon laser head doing 6 watts with less than 400 hours on the tube and I also have a SP 168 White Light laser doing around 1.5 watts, powered by an Aurora switchmode type supply that can run from 220 VAC single phase or 3 phase power (I have it wired for single phase).
    The white light laser and power supply cost me $11,000 USD.
    The SP164 is TEMoo same as the SP164 and since I only have one power supply they will go as a pair. These lasers are class 4 , require water cooling and safety in mind since you could Ignite materials or go blind from being careless with stray laser beams.
    Make me an offer that I can't refuse and the pair is yours.
    I guarranty that you will never get the beam quality in current solid state lasers that you can from the above Ion lasers.
    P.S. I also have blue optics for the SP 164 laser that produced 500 milliwatts (good for Holography) before I changed them to broadband Argon (5 lines).

    Rick
    Profile Redacted by Admin @ 04.24.2010

  2. #2
    Join Date
    Mar 2006
    Location
    Ottawa, Ontario, Canada
    Posts
    489

    Default

    Below is a link to pictures of my Argon laser FS

    http://www.laserlover.zoomshare.com/...ng%206%20watts

    Also find PIC's of the White Light laser at
    " http://www.laserlover.zoomshare.com/...0light%20laser "

    Rick
    Profile Redacted by Admin @ 04.24.2010

  3. #3
    Join Date
    Mar 2006
    Location
    Ottawa, Ontario, Canada
    Posts
    489

    Cool

    All my Ion lasers have been sold along with my NEOS PCAOM.
    Thanks Brian & Keith.
    Rick
    Profile Redacted by Admin @ 04.24.2010

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •