Results 1 to 2 of 2

Thread: Marc @ CT Laser

  1. #1
    Join Date
    Feb 2010
    Location
    NJ
    Posts
    270

    Default Marc @ CT Laser

    Ok, ok. Another glowing review for Marc.

    Let's just say Marc went up against a lot with my projector, probably more than any other piece he's ever built. I won't get into the details other than to say it took an absurdly comical, stressful, and ridiculous amount of time to get it done and 100% of everything that happened was completely beyond his control. I'm guessing that as a direct result of this box, if he wanted to grow his hair back, he has a lot less to work with now.

    Despite the problems, Marc took it upon himself to personally be responsible for the wrongs of others and the result is a projector that started out as a 1.25 watt build and is now pushing about 2.3-2.4 watts and could do 2.5 (it's dialed back a hair in the 445 for better white balance.)

    The result is this:

    http://www.facebook.com/media/set/?s...9cf75e0&type=1

    and while these are some pretty terrible photos, you get the general idea. I'm now a member of the coherent light club!

    Using QS and DT-40 wides, specs at the aperture of each module are:
    670/640
    500/532
    473/275
    445/850

  2. #2
    Join Date
    May 2008
    Location
    Once it was called "Bel Paese" = ITALY
    Posts
    858

    Default

    Great job he done!
    Another confirmation about Marc ability: He is a "gold-hand" guy.
    my webpage
    http://stevemilani.jimdo.com
    Skype ID: stevemilani957

    my RGB analogue projectors:
    3.9 W (640/532/445) 30kpps
    2.6 W (655/532/450) 30kpps
    2.5 W (638/532/450) 30kpps
    0.7 W (test unit)(635/532/473) 18kpps

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •