Scanner x and y rotated?

[smokeAndMirrors]

Bizarre. A projector I have seems to have scanners that are 90 degrees out (ie if I select a cue that is a horizontal line it displays vertically). I run Quickshow but haven't yet thought of a cunning way to fix this. Any ideas? Or must I open up the projector and fiddle?

[norty303]

You can just rotate in the zone settings, but thats no good if you are daisy chaining a projector that's 'right'. You just need to swap the modulation lines for X and Y into the driver. If they are on separate plugs it should be very simple. Obviously, don't swap the driver to galvo cables as they are matched pairs.