Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Single channel GM20 driver with damping

  1. #1
    Join Date
    Nov 2005
    Location
    Melbourne, Australia
    Posts
    3,702

    Default Single channel GM20 driver with damping

    Hey guys,

    I have just finished a nice little GM20/other actuator driver. There is no reason why it cant be used for other driver uses, such as small motors and the like.

    Features:

    - trim pot for actuator excursion amount
    - trim pot for output offset
    - trim pot for damping - eliminate the GM20 bounce
    - Power supply up to +/- 30v making it suitable to run off the scanner power supply.
    - screw down quick disconnect plugs for power input and GM20 output
    - Max current output - ~500ma

    I guess a picture tells 1000 words.

    Cost for this board, $25AUD + shipping + GST if applicable

    Will have a 8 channel version of this design shortly that will plug straight into the DMX16T driver we have. Also a 8 channel DMX analogue board that will plug straight in is nearly finished Beam table time!!!
    Attached Thumbnails Attached Thumbnails gm20drvsm.JPG  

    KVANT Australian projector sales
    https://www.facebook.com/kvantaus/

    Lasershowparts- Laser Parts at great prices
    https://www.facebook.com/lasershowparts/

  2. #2
    Join Date
    Oct 2009
    Location
    Perth Western Australia
    Posts
    844

    Default

    Dave, you are the man!!! so neat and tidy, small and a bargain!

    Thanks for making these, you're a star.

    Thanks for the gm20 arms to,they a much nicer than what I had.

    Can you please send me 4 drivers?

    Cheers
    Kit

  3. #3
    Join Date
    Nov 2007
    Location
    Sydney, Australia
    Posts
    602

    Default

    Hey Dave

    I'd be up for 4 as well

    Cheers
    Troy
    RTI Piko RGB 4 Projector
    CT6215 Scanners & CT 671 Amps; CT6210 & Medialas Microamps.
    RGBLaser Systems 6000mW RGB Module - 638nm/445nm/532
    LD2000 Pro + QM2000.net + Beyond
    Etherdream + LSX

    Old Projector Build


  4. #4
    Join Date
    Nov 2005
    Location
    Melbourne, Australia
    Posts
    3,702

    Default

    No worries guys.

    Just waiting on some bits to build up the rest of the boards.. Should have something late this week

    Dave
    KVANT Australian projector sales
    https://www.facebook.com/kvantaus/

    Lasershowparts- Laser Parts at great prices
    https://www.facebook.com/lasershowparts/

  5. #5
    Join Date
    May 2009
    Location
    Sacramento, California
    Posts
    608

    Default

    PM sent.
    I would like 5 & maybe as many as 10,I need to finish the beam table layout and effect positions first.
    Will there be three phase!!!!

  6. #6
    Join Date
    Jul 2007
    Location
    Knoxville, TN, USA
    Posts
    3,154

    Default

    I'd be interested in a couple, as well!!
    PM sent!!

    Is this going to be a permanent (hopefully!) offering from your company?
    RR

    Metrologic HeNe 3.3mw Modulated laser, 2 Radio Shack motors, and a broken mirror.
    1979.
    Sweet.....

  7. #7
    Join Date
    Sep 2007
    Location
    Texas
    Posts
    793

    Default

    I'd want 4. PM sent.

    Greg
    "Information not shared, is information lost forever"

    Join ILDA
    Support Photonlexicon

  8. #8
    Join Date
    Jun 2010
    Location
    Australia
    Posts
    3,734

    Default

    Dave, nice man!

    I second the "Dave Arms" they are excellent!
    This space for rent.

  9. #9
    Join Date
    Nov 2005
    Location
    Melbourne, Australia
    Posts
    3,702

    Default

    Quote Originally Posted by Stuka View Post
    Is this going to be a permanent (hopefully!) offering from your company?
    Yeah, certainly a permanent offering. This single channel driver, along with a 8 channel version that the board is half designed for
    KVANT Australian projector sales
    https://www.facebook.com/kvantaus/

    Lasershowparts- Laser Parts at great prices
    https://www.facebook.com/lasershowparts/

  10. #10
    Join Date
    Nov 2005
    Location
    Melbourne, Australia
    Posts
    3,702

    Default

    All the parts have finally tricked in. I have a few built up, Ill get a few more done over the weekend, and give them a good stress test.
    KVANT Australian projector sales
    https://www.facebook.com/kvantaus/

    Lasershowparts- Laser Parts at great prices
    https://www.facebook.com/lasershowparts/

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •