Newport, CNI and some other stuff. Lanek's distress fund

[LaNeK779]

General stuff: Hard pressed for cash in order to continue my builds, so some stuff has to go. Would prefer paypal, please. General shipping estimate: europe 13euro per kilo, US around 20 euro per kilo, registered slow mail. Detailed shipping quote will be made when sales are semi-final

1. SOLD SOLD SOLD Would anybody be interested in Newport Compact Dovetail Linear Stage with 40x40mm adaptor plate?
Can be used to position dichro mounts, telescope lenses, cylinder lenses or whatever needs micro adjustable positioning in one axis (or you can couple two and make yourself a XY linear translation stage) Ideally suited for test setups

Used, but in top operating condition, smooth movement, no stuck knobs, no broken springs. Just some very very minor cosmetix (scratches etc)
http://search.newport.com/?q=*&x2=sku&q2=M-DS40-X# and http://search.newport.com/?x2=sku&q2=M-B-2B
Looking for 59 euro each bundle of m-ds40 and m-b-2b

http://img689.imageshack.us/img689/2404/mds401.jpg

http://img155.imageshack.us/img155/2716/mds402.jpg

2. SOLD SOLD SOLD Newport MM2a 25mm dicrho mounts. The usual stuff, used, fully working just some cosmetic issues. Looking for 23 euros each, 3 pieces available, or 60 euros for all three at once.

http://img263.imageshack.us/img263/1821/mm2a2.jpg

3. SOLD SOLD SOLD Unbranded XYZ adjustable mount, pulled from medical machinery. It features micrometer screws on all axis (higher than 80tpi), this was used to position a flowcell in front of a laser light path for cell sorting and counting, so it can be pretty accurate. Branded translation stages like this cost mid three digit numbers, of course i am not anything near that. Looking to get around 80 euros for each. Approx 1cm of usable travel on all axis

http://www.photonlexicon.com/forums/...4&d=1333573639

http://www.photonlexicon.com/forums/...3&d=1333573639

http://www.photonlexicon.com/forums/...5&d=1333573639


4. SOLD SOLD SOLD Something of quality and with a bit of history in it, too; an analog CNI 532nm MGL-III, doing approx 150mw. This has been to more than a couple of UKLEMs, and it has also sat on mister Stanwax’s bench for an operation. (described here http://www.photonlexicon.com/forums/...g-my-CNI-laser ). Unit is analog, and has a very good response to modulation, too. The previous owner told me that it did around 200 - 250 hours with him and I have added another 5-10 max. You can get quality and some substantial power for a small build, with the price of the usual fleabay junk. Comes complete with driver and 5v psu. The wiring has been “altered” a bit, to make it easier to wire inside a projector. Looking to get 110 euros. Again, I would like to avoid shipping to the US.

http://img804.imageshack.us/img804/112/m5321.jpg
http://img100.imageshack.us/img100/3900/m5322.jpg

I think that’s it for now. I’d be more than happy to provide additional details upon request.
Sorry for the long post…

[Bradfo69]

Humm.... somehow going to need to figure a way to convince you to ship to the US. The 150mW CNI with the storied history is exactly the module I've been searching for. Somewhere in the neighborhood of 7-8 months to a year I suppose. Everything I tend to find at that power is TTL. Plus, what it's being matched with is also CNI so, the heights are the same. If it can be shipped in two boxes, we're golden. If not, write the customs ticket as "theatrical stage light". I've never had a problem.

[LaNeK779]

Well, it seems i do not need much convincing after all, if presented with the right sort of arguments...
Number 6 is now sold... that was quick and much needed

[LaNeK779]

Item 2 above is now sold

[LaNeK779]

15 characters...

[LaNeK779]

not to clog up the forums with new threads, I'll continue with this one

I have two of these monolithic crystal assemblies for sale, never used and still in their boxes, assorted with indium foil. Asking price is 40 usd each, plus a couple more for shipping. I got them a few years ago and they are the same as the ones steve-o has been experimenting with. You can see steve-o's adventures here http://www.photonlexicon.com/forums/...-Green-Thread). You add 808nm pump, focusing and correcting optics and you have your own dpss. I'm not going to make any output power claims, as this is all very depended on your setup. If interested, let me know by PM.



here is an overpriced example off fleabay http://www.ebay.com/itm/Second-Harmo...item46426beb60


I have two GM20 motors, with arm, mount, a mini post with 1'' vertical travel and a pcb driver circuit. More info on the pcb here http://www.photonlexicon.com/forums/...-and-DZ-driver . Asking price is 65 usd each. I can get a shipping quote, but I wouldn't expect more than 12usd on it.




I also have one GM20 motor, with arm and mount (no mini post, no pcb). Asking price is 55 usd




I also have 10 of dave's brass mini flex mirror mounts. If someone wants a few, is in a hurry and can't wait for shipping from australia let me know



All parts necessary to make a 4-5w rgb projector are also here... (1w cni green, quad mitsu with optics and badpip quad, dual blue, a full set of stanwax boards (ilda, colour, size pots, colour balance pots etc, ems4000/1900 combo), but for now I'm selling the crystals and the GM20

thanks for looking!!

[dnar]

Necro post !

[LaNeK779]

Well, since I haven't been on here for ages, it is a resurrected post from a resurrected user.

Hope all is well over there Wayne

[Bradfo69]

When the time comes that' you're talking about more than the crystals and GM20... talk to me about the mitsu quad w/badpip driver and the stanwax boards. Thanks!

[LaNeK779]

oh it's you again....

you will have PM in a while