Quickshow Automation Help

[jaycey]

Is it possible to get a quickshow to automaticaly play through all of the cues on a selected page, just say starting on the "hot beam" page click on the first cue have it play for a pre programmed amount of time and then pregress to the next cue without having to manually select it?

If it is let me in on it please

Thanks
Jason

[GT500]

Hi,

Use the Virtual LJ function

As an example set the BPM value to 60 BPM on the BPM clock and then right click the Virtual LJ button next to the clock on the top Menu Bar, set the values to trigger cues on BPM and change every 32 beats and enable the Virtual LJ this will give you roughly 30 seconds on each cue. reduce the beats to 16 and you will get approx 15 seconds on each cue.

Play around with the values to get the interval between cues that you require.

Hope this helps!!!!

[White-Light]

There are various options if you right click over the VLJ button. However, I made a tutorial some time ago covering VLJ and Layers.

[jaycey]

Thats an excelent tutorial, many thanks!

Cheers